This is the latest recevied telemetry packets stored in our database for station/object PE1PMD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782072794 | 148 Count | 487 Count | 110 Count | 0 VDC | 0 VDC |
| 1782071890 | 143 Count | 463 Count | 107 Count | 0 VDC | 0 VDC |
| 1782070987 | 138 Count | 436 Count | 103 Count | 0 VDC | 0 VDC |
| 1782070083 | 135 Count | 411 Count | 101 Count | 0 VDC | 0 VDC |
| 1782069180 | 130 Count | 385 Count | 97 Count | 0 VDC | 0 VDC |
| 1782068276 | 125 Count | 364 Count | 93 Count | 0 VDC | 0 VDC |
| 1782067372 | 122 Count | 342 Count | 91 Count | 0 VDC | 0 VDC |
| 1782066469 | 118 Count | 318 Count | 88 Count | 0 VDC | 0 VDC |
| 1782065650 | 115 Count | 300 Count | 86 Count | 0 VDC | 0 VDC |
| 1782064744 | 111 Count | 288 Count | 83 Count | 0 VDC | 0 VDC |
| 1782063839 | 107 Count | 269 Count | 80 Count | 0 VDC | 0 VDC |
| 1782062936 | 103 Count | 239 Count | 77 Count | 0 VDC | 0 VDC |
| 1782062032 | 101 Count | 212 Count | 76 Count | 0 VDC | 0 VDC |
| 1782061129 | 96 Count | 180 Count | 74 Count | 0 VDC | 0 VDC |
| 1782060225 | 92 Count | 155 Count | 71 Count | 0 VDC | 0 VDC |
| 1782059322 | 89 Count | 150 Count | 69 Count | 0 VDC | 0 VDC |
| 1782058418 | 86 Count | 145 Count | 67 Count | 0 VDC | 0 VDC |
| 1782057515 | 82 Count | 140 Count | 64 Count | 0 VDC | 0 VDC |
| 1782056611 | 80 Count | 135 Count | 63 Count | 0 VDC | 0 VDC |
| 1782055707 | 76 Count | 128 Count | 60 Count | 0 VDC | 0 VDC |
| 1782054804 | 70 Count | 119 Count | 55 Count | 0 VDC | 0 VDC |
| 1782053900 | 66 Count | 113 Count | 52 Count | 0 VDC | 0 VDC |
| 1782052997 | 63 Count | 107 Count | 50 Count | 0 VDC | 0 VDC |
| 1782052093 | 60 Count | 100 Count | 48 Count | 0 VDC | 0 VDC |
| 1782051190 | 58 Count | 94 Count | 47 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)