This is the latest recevied telemetry packets stored in our database for station/object PE1PMD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791535929 | 482 Count | 916 Count | 327 Count | 0 VDC | 0 VDC |
| 1791535024 | 480 Count | 914 Count | 326 Count | 0 VDC | 0 VDC |
| 1791534121 | 478 Count | 912 Count | 325 Count | 0 VDC | 0 VDC |
| 1791533217 | 476 Count | 910 Count | 324 Count | 0 VDC | 0 VDC |
| 1791532314 | 474 Count | 909 Count | 323 Count | 0 VDC | 0 VDC |
| 1791531410 | 472 Count | 908 Count | 322 Count | 0 VDC | 0 VDC |
| 1791530592 | 470 Count | 906 Count | 321 Count | 0 VDC | 0 VDC |
| 1791529689 | 468 Count | 904 Count | 320 Count | 0 VDC | 0 VDC |
| 1791528785 | 455 Count | 882 Count | 308 Count | 0 VDC | 0 VDC |
| 1791527881 | 453 Count | 874 Count | 307 Count | 0 VDC | 0 VDC |
| 1791526978 | 451 Count | 872 Count | 306 Count | 0 VDC | 0 VDC |
| 1791526074 | 449 Count | 870 Count | 305 Count | 0 VDC | 0 VDC |
| 1791525171 | 448 Count | 869 Count | 305 Count | 0 VDC | 0 VDC |
| 1791524267 | 447 Count | 868 Count | 305 Count | 0 VDC | 0 VDC |
| 1791523364 | 445 Count | 867 Count | 304 Count | 0 VDC | 0 VDC |
| 1791522460 | 443 Count | 865 Count | 303 Count | 0 VDC | 0 VDC |
| 1791521557 | 431 Count | 852 Count | 292 Count | 0 VDC | 0 VDC |
| 1791520653 | 399 Count | 814 Count | 261 Count | 0 VDC | 0 VDC |
| 1791519749 | 395 Count | 809 Count | 258 Count | 0 VDC | 0 VDC |
| 1791518849 | 393 Count | 808 Count | 257 Count | 0 VDC | 0 VDC |
| 1791517942 | 391 Count | 805 Count | 256 Count | 0 VDC | 0 VDC |
| 1791517039 | 390 Count | 803 Count | 256 Count | 0 VDC | 0 VDC |
| 1791516136 | 388 Count | 801 Count | 255 Count | 0 VDC | 0 VDC |
| 1791515231 | 386 Count | 799 Count | 254 Count | 0 VDC | 0 VDC |
| 1791514328 | 384 Count | 797 Count | 253 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)