This is the latest recevied telemetry packets stored in our database for station/object SQ2PDS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793332907 | 116 Count | 908 Count | 80 Count | 0 VDC | 0 VDC |
| 1793331106 | 113 Count | 881 Count | 78 Count | 0 VDC | 0 VDC |
| 1793329306 | 109 Count | 856 Count | 75 Count | 0 VDC | 0 VDC |
| 1793327505 | 106 Count | 830 Count | 73 Count | 0 VDC | 0 VDC |
| 1793325704 | 102 Count | 798 Count | 70 Count | 0 VDC | 0 VDC |
| 1793323903 | 98 Count | 770 Count | 67 Count | 0 VDC | 0 VDC |
| 1793322102 | 90 Count | 740 Count | 60 Count | 0 VDC | 0 VDC |
| 1793320301 | 87 Count | 710 Count | 58 Count | 0 VDC | 0 VDC |
| 1793318500 | 83 Count | 681 Count | 55 Count | 0 VDC | 0 VDC |
| 1793316700 | 80 Count | 655 Count | 53 Count | 0 VDC | 0 VDC |
| 1793313105 | 68 Count | 594 Count | 47 Count | 0 VDC | 0 VDC |
| 1793311304 | 64 Count | 567 Count | 44 Count | 0 VDC | 0 VDC |
| 1793309503 | 61 Count | 540 Count | 42 Count | 0 VDC | 0 VDC |
| 1793307703 | 57 Count | 510 Count | 39 Count | 0 VDC | 0 VDC |
| 1793305902 | 53 Count | 480 Count | 36 Count | 0 VDC | 0 VDC |
| 1793304101 | 49 Count | 441 Count | 33 Count | 0 VDC | 0 VDC |
| 1793302300 | 46 Count | 416 Count | 31 Count | 0 VDC | 0 VDC |
| 1793300499 | 38 Count | 384 Count | 24 Count | 0 VDC | 0 VDC |
| 1793298700 | 34 Count | 355 Count | 21 Count | 0 VDC | 0 VDC |
| 1793296897 | 31 Count | 326 Count | 19 Count | 0 VDC | 0 VDC |
| 1793295097 | 29 Count | 288 Count | 18 Count | 0 VDC | 0 VDC |
| 1793293296 | 26 Count | 236 Count | 16 Count | 0 VDC | 0 VDC |
| 1793291506 | 19 Count | 200 Count | 14 Count | 0 VDC | 0 VDC |
| 1793289705 | 16 Count | 165 Count | 12 Count | 0 VDC | 0 VDC |
| 1793287904 | 12 Count | 124 Count | 9 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)