This is the latest recevied telemetry packets stored in our database for station/object M9NSZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791060685 | 114 Count | 798 Count | 0 Count | 0 VDC | 0 VDC |
| 1791058881 | 113 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1791057078 | 112 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1791055275 | 111 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1791053508 | 110 Count | 793 Count | 0 Count | 0 VDC | 0 VDC |
| 1791051705 | 109 Count | 792 Count | 0 Count | 0 VDC | 0 VDC |
| 1791049902 | 108 Count | 785 Count | 0 Count | 0 VDC | 0 VDC |
| 1791048099 | 107 Count | 768 Count | 0 Count | 0 VDC | 0 VDC |
| 1791046296 | 106 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
| 1791044493 | 105 Count | 750 Count | 0 Count | 0 VDC | 0 VDC |
| 1791042690 | 104 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1791040887 | 103 Count | 699 Count | 0 Count | 0 VDC | 0 VDC |
| 1791039084 | 102 Count | 690 Count | 0 Count | 0 VDC | 0 VDC |
| 1791037281 | 101 Count | 678 Count | 0 Count | 0 VDC | 0 VDC |
| 1791035478 | 100 Count | 666 Count | 0 Count | 0 VDC | 0 VDC |
| 1791033675 | 99 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1791031906 | 98 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
| 1791030103 | 97 Count | 633 Count | 0 Count | 0 VDC | 0 VDC |
| 1791028300 | 96 Count | 622 Count | 0 Count | 0 VDC | 0 VDC |
| 1791026497 | 95 Count | 611 Count | 0 Count | 0 VDC | 0 VDC |
| 1791024694 | 94 Count | 600 Count | 0 Count | 0 VDC | 0 VDC |
| 1791022891 | 93 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1791021088 | 92 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1791019285 | 91 Count | 562 Count | 0 Count | 0 VDC | 0 VDC |
| 1791017482 | 90 Count | 542 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)