This is the latest recevied telemetry packets stored in our database for station/object M9NSZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787581167 | 38 Count | 733 Count | 0 Count | 0 VDC | 0 VDC |
| 1787579364 | 37 Count | 720 Count | 0 Count | 0 VDC | 0 VDC |
| 1787577561 | 36 Count | 705 Count | 0 Count | 0 VDC | 0 VDC |
| 1787575791 | 35 Count | 685 Count | 0 Count | 0 VDC | 0 VDC |
| 1787573988 | 34 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1787572185 | 33 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1787570382 | 32 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1787568579 | 31 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1787566776 | 30 Count | 605 Count | 0 Count | 0 VDC | 0 VDC |
| 1787564973 | 29 Count | 590 Count | 0 Count | 0 VDC | 0 VDC |
| 1787563170 | 28 Count | 569 Count | 0 Count | 0 VDC | 0 VDC |
| 1787561367 | 27 Count | 548 Count | 0 Count | 0 VDC | 0 VDC |
| 1787559564 | 26 Count | 521 Count | 0 Count | 0 VDC | 0 VDC |
| 1787557761 | 25 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1787555958 | 24 Count | 481 Count | 0 Count | 0 VDC | 0 VDC |
| 1787554194 | 23 Count | 462 Count | 0 Count | 0 VDC | 0 VDC |
| 1787552391 | 22 Count | 445 Count | 0 Count | 0 VDC | 0 VDC |
| 1787550588 | 21 Count | 421 Count | 0 Count | 0 VDC | 0 VDC |
| 1787548785 | 20 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1787546982 | 19 Count | 380 Count | 0 Count | 0 VDC | 0 VDC |
| 1787545179 | 18 Count | 357 Count | 0 Count | 0 VDC | 0 VDC |
| 1787543376 | 17 Count | 338 Count | 0 Count | 0 VDC | 0 VDC |
| 1787541573 | 16 Count | 316 Count | 0 Count | 0 VDC | 0 VDC |
| 1787539769 | 15 Count | 296 Count | 0 Count | 0 VDC | 0 VDC |
| 1787537966 | 14 Count | 276 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)