This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788098110 | 322 Count | 857 Count | 307 Count | 4.14 VDC | 0.14 VDC |
| 1788096306 | 287 Count | 800 Count | 273 Count | 4.14 VDC | 0.14 VDC |
| 1788094503 | 264 Count | 740 Count | 251 Count | 4.14 VDC | 0.14 VDC |
| 1788092700 | 247 Count | 676 Count | 235 Count | 4.14 VDC | 0.14 VDC |
| 1788090897 | 235 Count | 626 Count | 224 Count | 4.14 VDC | 0.14 VDC |
| 1788089094 | 219 Count | 555 Count | 209 Count | 4.14 VDC | 0.14 VDC |
| 1788087291 | 187 Count | 487 Count | 178 Count | 4.14 VDC | 0.14 VDC |
| 1788085525 | 167 Count | 441 Count | 159 Count | 4.14 VDC | 0.14 VDC |
| 1788083722 | 150 Count | 386 Count | 143 Count | 4.14 VDC | 0.14 VDC |
| 1788081919 | 135 Count | 332 Count | 129 Count | 4.14 VDC | 0.14 VDC |
| 1788080116 | 114 Count | 277 Count | 109 Count | 4.14 VDC | 0.14 VDC |
| 1788078313 | 96 Count | 232 Count | 92 Count | 4.14 VDC | 0.14 VDC |
| 1788076510 | 81 Count | 196 Count | 78 Count | 4.14 VDC | 0.14 VDC |
| 1788074707 | 65 Count | 162 Count | 63 Count | 4.14 VDC | 0.14 VDC |
| 1788072904 | 45 Count | 112 Count | 44 Count | 4.14 VDC | 0.14 VDC |
| 1788071101 | 15 Count | 45 Count | 15 Count | 4.14 VDC | 0.14 VDC |
| 1788069298 | 455 Count | 1014 Count | 432 Count | 4.14 VDC | 0.14 VDC |
| 1788067495 | 440 Count | 969 Count | 418 Count | 4.14 VDC | 0.14 VDC |
| 1788065692 | 426 Count | 933 Count | 405 Count | 4.14 VDC | 0.14 VDC |
| 1788063925 | 408 Count | 905 Count | 388 Count | 4.14 VDC | 0.14 VDC |
| 1788062122 | 389 Count | 868 Count | 370 Count | 4.14 VDC | 0.14 VDC |
| 1788060319 | 366 Count | 828 Count | 348 Count | 4.14 VDC | 0.14 VDC |
| 1788058516 | 340 Count | 780 Count | 323 Count | 4.14 VDC | 0.14 VDC |
| 1788056713 | 322 Count | 751 Count | 306 Count | 4.14 VDC | 0.14 VDC |
| 1788054910 | 308 Count | 727 Count | 293 Count | 4.14 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)