This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787094795 | 78 Count | 217 Count | 73 Count | 4.14 VDC | 0.14 VDC |
| 1787092992 | 61 Count | 178 Count | 57 Count | 4.14 VDC | 0.14 VDC |
| 1787091189 | 36 Count | 105 Count | 33 Count | 4.14 VDC | 0.14 VDC |
| 1787089386 | 26 Count | 80 Count | 24 Count | 4.14 VDC | 0.14 VDC |
| 1787087583 | 16 Count | 54 Count | 15 Count | 4.14 VDC | 0.14 VDC |
| 1787085818 | 8 Count | 25 Count | 8 Count | 4.14 VDC | 0.14 VDC |
| 1787084015 | 373 Count | 1036 Count | 347 Count | 4.14 VDC | 0.14 VDC |
| 1787082212 | 346 Count | 974 Count | 321 Count | 4.14 VDC | 0.14 VDC |
| 1787080409 | 336 Count | 950 Count | 312 Count | 4.14 VDC | 0.14 VDC |
| 1787078606 | 314 Count | 899 Count | 291 Count | 4.14 VDC | 0.14 VDC |
| 1787076803 | 288 Count | 847 Count | 266 Count | 4.14 VDC | 0.14 VDC |
| 1787074999 | 257 Count | 783 Count | 236 Count | 4.14 VDC | 0.14 VDC |
| 1787073196 | 242 Count | 753 Count | 222 Count | 4.14 VDC | 0.14 VDC |
| 1787071393 | 229 Count | 720 Count | 210 Count | 4.14 VDC | 0.14 VDC |
| 1787069590 | 219 Count | 694 Count | 201 Count | 4.14 VDC | 0.14 VDC |
| 1787067787 | 209 Count | 662 Count | 192 Count | 4.14 VDC | 0.14 VDC |
| 1787065984 | 198 Count | 628 Count | 182 Count | 4.14 VDC | 0.14 VDC |
| 1787064215 | 178 Count | 570 Count | 163 Count | 4.14 VDC | 0.14 VDC |
| 1787062412 | 169 Count | 512 Count | 155 Count | 4.14 VDC | 0.14 VDC |
| 1787060609 | 159 Count | 485 Count | 146 Count | 4.14 VDC | 0.14 VDC |
| 1787058806 | 151 Count | 462 Count | 139 Count | 4.14 VDC | 0.14 VDC |
| 1787057003 | 141 Count | 434 Count | 130 Count | 4.14 VDC | 0.14 VDC |
| 1787055200 | 132 Count | 414 Count | 122 Count | 4.14 VDC | 0.14 VDC |
| 1787053397 | 120 Count | 374 Count | 111 Count | 4.14 VDC | 0.14 VDC |
| 1787051594 | 111 Count | 332 Count | 103 Count | 4.14 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)