This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793116669 | 443 Count | 392 Count | 308 Count | 4.19 VDC | 0.14 VDC |
| 1793114866 | 440 Count | 390 Count | 306 Count | 4.18 VDC | 0.14 VDC |
| 1793113063 | 437 Count | 388 Count | 304 Count | 4.17 VDC | 0.14 VDC |
| 1793111260 | 434 Count | 386 Count | 302 Count | 4.2 VDC | 0.14 VDC |
| 1793109457 | 431 Count | 384 Count | 300 Count | 4.23 VDC | 0.14 VDC |
| 1793107654 | 428 Count | 382 Count | 298 Count | 4.24 VDC | 0.14 VDC |
| 1793105851 | 425 Count | 380 Count | 296 Count | 4.21 VDC | 0.14 VDC |
| 1793104048 | 422 Count | 378 Count | 294 Count | 4.21 VDC | 0.14 VDC |
| 1793102245 | 419 Count | 376 Count | 292 Count | 4.2 VDC | 0.14 VDC |
| 1793100442 | 416 Count | 373 Count | 290 Count | 4.22 VDC | 0.14 VDC |
| 1793098639 | 413 Count | 370 Count | 288 Count | 4.17 VDC | 0.14 VDC |
| 1793096836 | 410 Count | 368 Count | 286 Count | 4.22 VDC | 0.14 VDC |
| 1793095065 | 407 Count | 366 Count | 284 Count | 4.23 VDC | 0.14 VDC |
| 1793093262 | 404 Count | 364 Count | 282 Count | 4.2 VDC | 0.14 VDC |
| 1793091459 | 401 Count | 360 Count | 280 Count | 4.18 VDC | 0.14 VDC |
| 1793089656 | 398 Count | 356 Count | 278 Count | 4.22 VDC | 0.14 VDC |
| 1793087853 | 395 Count | 354 Count | 276 Count | 4.18 VDC | 0.14 VDC |
| 1793086050 | 392 Count | 352 Count | 274 Count | 4.21 VDC | 0.14 VDC |
| 1793084247 | 389 Count | 350 Count | 272 Count | 4.18 VDC | 0.14 VDC |
| 1793082444 | 386 Count | 348 Count | 270 Count | 4.17 VDC | 0.14 VDC |
| 1793080642 | 381 Count | 343 Count | 266 Count | 4.18 VDC | 0.14 VDC |
| 1793078839 | 376 Count | 337 Count | 262 Count | 4.23 VDC | 0.14 VDC |
| 1793077036 | 373 Count | 335 Count | 260 Count | 4.21 VDC | 0.14 VDC |
| 1793075233 | 369 Count | 332 Count | 257 Count | 4.2 VDC | 0.14 VDC |
| 1793073465 | 366 Count | 330 Count | 255 Count | 4.24 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)