This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777006521 | 268 Count | 502 Count | 250 Count | 0 VDC | 0 VDC |
| 1777004717 | 244 Count | 476 Count | 227 Count | 0 VDC | 0 VDC |
| 1777002913 | 220 Count | 450 Count | 204 Count | 0 VDC | 0 VDC |
| 1777001108 | 194 Count | 425 Count | 179 Count | 0 VDC | 0 VDC |
| 1776999304 | 176 Count | 400 Count | 162 Count | 0 VDC | 0 VDC |
| 1776997500 | 154 Count | 354 Count | 141 Count | 0 VDC | 0 VDC |
| 1776995696 | 136 Count | 311 Count | 124 Count | 0 VDC | 0 VDC |
| 1776993896 | 115 Count | 272 Count | 104 Count | 0 VDC | 0 VDC |
| 1776992092 | 100 Count | 242 Count | 90 Count | 0 VDC | 0 VDC |
| 1776990284 | 86 Count | 217 Count | 77 Count | 0 VDC | 0 VDC |
| 1776988479 | 79 Count | 197 Count | 71 Count | 0 VDC | 0 VDC |
| 1776986675 | 61 Count | 162 Count | 54 Count | 0 VDC | 0 VDC |
| 1776984871 | 44 Count | 135 Count | 38 Count | 0 VDC | 0 VDC |
| 1776983067 | 37 Count | 108 Count | 32 Count | 0 VDC | 0 VDC |
| 1776981258 | 29 Count | 87 Count | 25 Count | 0 VDC | 0 VDC |
| 1776979454 | 22 Count | 70 Count | 19 Count | 0 VDC | 0 VDC |
| 1776977650 | 17 Count | 53 Count | 15 Count | 0 VDC | 0 VDC |
| 1776975846 | 13 Count | 38 Count | 12 Count | 0 VDC | 0 VDC |
| 1776974042 | 6 Count | 19 Count | 6 Count | 0 VDC | 0 VDC |
| 1776972238 | 654 Count | 1008 Count | 585 Count | 0 VDC | 0 VDC |
| 1776970434 | 648 Count | 991 Count | 580 Count | 0 VDC | 0 VDC |
| 1776968630 | 641 Count | 975 Count | 574 Count | 0 VDC | 0 VDC |
| 1776966826 | 635 Count | 957 Count | 569 Count | 0 VDC | 0 VDC |
| 1776965022 | 628 Count | 938 Count | 563 Count | 0 VDC | 0 VDC |
| 1776963218 | 624 Count | 923 Count | 560 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)