This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781379447 | 136 Count | 368 Count | 116 Count | 0 VDC | 0 VDC |
| 1781377643 | 125 Count | 343 Count | 107 Count | 0 VDC | 0 VDC |
| 1781375838 | 121 Count | 335 Count | 104 Count | 0 VDC | 0 VDC |
| 1781374038 | 114 Count | 312 Count | 98 Count | 0 VDC | 0 VDC |
| 1781372229 | 108 Count | 293 Count | 93 Count | 0 VDC | 0 VDC |
| 1781370425 | 104 Count | 282 Count | 90 Count | 0 VDC | 0 VDC |
| 1781368621 | 99 Count | 265 Count | 86 Count | 0 VDC | 0 VDC |
| 1781366817 | 90 Count | 242 Count | 78 Count | 0 VDC | 0 VDC |
| 1781365012 | 82 Count | 222 Count | 71 Count | 0 VDC | 0 VDC |
| 1781363208 | 73 Count | 201 Count | 63 Count | 0 VDC | 0 VDC |
| 1781361404 | 64 Count | 166 Count | 55 Count | 0 VDC | 0 VDC |
| 1781360255 | 59 Count | 151 Count | 51 Count | 0 VDC | 0 VDC |
| 1781358451 | 49 Count | 112 Count | 42 Count | 0 VDC | 0 VDC |
| 1781356646 | 46 Count | 93 Count | 40 Count | 0 VDC | 0 VDC |
| 1781354842 | 38 Count | 66 Count | 33 Count | 0 VDC | 0 VDC |
| 1781353038 | 32 Count | 56 Count | 28 Count | 0 VDC | 0 VDC |
| 1781351234 | 26 Count | 42 Count | 23 Count | 0 VDC | 0 VDC |
| 1781349430 | 18 Count | 23 Count | 16 Count | 0 VDC | 0 VDC |
| 1781347626 | 13 Count | 17 Count | 12 Count | 0 VDC | 0 VDC |
| 1781345822 | 2 Count | 5 Count | 2 Count | 0 VDC | 0 VDC |
| 1781344017 | 473 Count | 1003 Count | 397 Count | 0 VDC | 0 VDC |
| 1781342213 | 471 Count | 999 Count | 396 Count | 0 VDC | 0 VDC |
| 1781340409 | 467 Count | 988 Count | 393 Count | 0 VDC | 0 VDC |
| 1781338048 | 455 Count | 965 Count | 382 Count | 0 VDC | 0 VDC |
| 1781336244 | 449 Count | 954 Count | 377 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)