This is the latest recevied telemetry packets stored in our database for station/object SQ2PDS-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792512191 | 67 Count | 680 Count | 49 Count | 0 VDC | 0 VDC |
| 1792510390 | 63 Count | 648 Count | 46 Count | 0 VDC | 0 VDC |
| 1792508589 | 56 Count | 587 Count | 40 Count | 0 VDC | 0 VDC |
| 1792506789 | 48 Count | 513 Count | 33 Count | 0 VDC | 0 VDC |
| 1792504988 | 45 Count | 467 Count | 31 Count | 0 VDC | 0 VDC |
| 1792503187 | 41 Count | 410 Count | 28 Count | 0 VDC | 0 VDC |
| 1792501386 | 38 Count | 368 Count | 26 Count | 0 VDC | 0 VDC |
| 1792499585 | 34 Count | 332 Count | 23 Count | 0 VDC | 0 VDC |
| 1792497785 | 31 Count | 301 Count | 21 Count | 0 VDC | 0 VDC |
| 1792495984 | 27 Count | 260 Count | 18 Count | 0 VDC | 0 VDC |
| 1792494182 | 24 Count | 221 Count | 16 Count | 0 VDC | 0 VDC |
| 1792492381 | 20 Count | 180 Count | 13 Count | 0 VDC | 0 VDC |
| 1792490589 | 13 Count | 136 Count | 11 Count | 0 VDC | 0 VDC |
| 1792488789 | 9 Count | 87 Count | 8 Count | 0 VDC | 0 VDC |
| 1792486988 | 3 Count | 36 Count | 3 Count | 0 VDC | 0 VDC |
| 1792485187 | 166 Count | 1040 Count | 114 Count | 0 VDC | 0 VDC |
| 1792483386 | 163 Count | 998 Count | 112 Count | 0 VDC | 0 VDC |
| 1792481585 | 159 Count | 980 Count | 109 Count | 0 VDC | 0 VDC |
| 1792477984 | 152 Count | 941 Count | 104 Count | 0 VDC | 0 VDC |
| 1792476183 | 150 Count | 923 Count | 103 Count | 0 VDC | 0 VDC |
| 1792474382 | 147 Count | 899 Count | 101 Count | 0 VDC | 0 VDC |
| 1792472581 | 144 Count | 880 Count | 99 Count | 0 VDC | 0 VDC |
| 1792470781 | 140 Count | 862 Count | 96 Count | 0 VDC | 0 VDC |
| 1792467188 | 129 Count | 825 Count | 91 Count | 0 VDC | 0 VDC |
| 1792465387 | 122 Count | 798 Count | 85 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)