This is the latest recevied telemetry packets stored in our database for station/object SP3KON-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765493288 | 33 Count | 50 Count | 27 Count | 0 VDC | 0 VDC |
| 1765492387 | 29 Count | 41 Count | 24 Count | 0 VDC | 0 VDC |
| 1765491486 | 21 Count | 27 Count | 17 Count | 0 VDC | 0 VDC |
| 1765490585 | 13 Count | 17 Count | 10 Count | 0 VDC | 0 VDC |
| 1765489580 | 12 Count | 17 Count | 10 Count | 0 VDC | 0 VDC |
| 1765488679 | 8 Count | 12 Count | 7 Count | 0 VDC | 0 VDC |
| 1765487778 | 4 Count | 6 Count | 4 Count | 0 VDC | 0 VDC |
| 1765486877 | 437 Count | 1007 Count | 336 Count | 0 VDC | 0 VDC |
| 1765485976 | 431 Count | 999 Count | 331 Count | 0 VDC | 0 VDC |
| 1765485075 | 424 Count | 989 Count | 325 Count | 0 VDC | 0 VDC |
| 1765484174 | 420 Count | 984 Count | 322 Count | 0 VDC | 0 VDC |
| 1765483274 | 415 Count | 977 Count | 318 Count | 0 VDC | 0 VDC |
| 1765482373 | 411 Count | 971 Count | 315 Count | 0 VDC | 0 VDC |
| 1765481472 | 406 Count | 964 Count | 311 Count | 0 VDC | 0 VDC |
| 1765480571 | 402 Count | 958 Count | 308 Count | 0 VDC | 0 VDC |
| 1765479670 | 398 Count | 952 Count | 305 Count | 0 VDC | 0 VDC |
| 1765478769 | 394 Count | 945 Count | 302 Count | 0 VDC | 0 VDC |
| 1765477868 | 389 Count | 937 Count | 298 Count | 0 VDC | 0 VDC |
| 1765476968 | 385 Count | 928 Count | 295 Count | 0 VDC | 0 VDC |
| 1765476067 | 381 Count | 921 Count | 292 Count | 0 VDC | 0 VDC |
| 1765475166 | 377 Count | 911 Count | 289 Count | 0 VDC | 0 VDC |
| 1765474265 | 369 Count | 894 Count | 282 Count | 0 VDC | 0 VDC |
| 1765473364 | 365 Count | 885 Count | 279 Count | 0 VDC | 0 VDC |
| 1765472463 | 362 Count | 877 Count | 277 Count | 0 VDC | 0 VDC |
| 1765471562 | 359 Count | 867 Count | 275 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)