This is the latest recevied telemetry packets stored in our database for station/object SQ8IPQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788105231 | 869 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
| 1788103205 | 868 Count | 817 Count | 0 Count | 0 VDC | 0 VDC |
| 1788101360 | 867 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1788099559 | 866 Count | 815 Count | 0 Count | 0 VDC | 0 VDC |
| 1788097759 | 865 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1788095958 | 864 Count | 813 Count | 0 Count | 0 VDC | 0 VDC |
| 1788094160 | 863 Count | 812 Count | 0 Count | 0 VDC | 0 VDC |
| 1788092356 | 862 Count | 811 Count | 0 Count | 0 VDC | 0 VDC |
| 1788090555 | 861 Count | 810 Count | 0 Count | 0 VDC | 0 VDC |
| 1788088755 | 860 Count | 809 Count | 0 Count | 0 VDC | 0 VDC |
| 1788065289 | 847 Count | 798 Count | 0 Count | 0 VDC | 0 VDC |
| 1788063488 | 846 Count | 797 Count | 0 Count | 0 VDC | 0 VDC |
| 1788061687 | 845 Count | 796 Count | 0 Count | 0 VDC | 0 VDC |
| 1788059887 | 844 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1788058086 | 843 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1788056285 | 842 Count | 793 Count | 0 Count | 0 VDC | 0 VDC |
| 1788054484 | 841 Count | 792 Count | 0 Count | 0 VDC | 0 VDC |
| 1788052684 | 840 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1788050883 | 839 Count | 790 Count | 0 Count | 0 VDC | 0 VDC |
| 1788049082 | 838 Count | 789 Count | 0 Count | 0 VDC | 0 VDC |
| 1788047281 | 837 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1788045480 | 836 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1788043688 | 835 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1788041887 | 834 Count | 786 Count | 0 Count | 0 VDC | 0 VDC |
| 1788040086 | 833 Count | 785 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)