This is the latest recevied telemetry packets stored in our database for station/object SQ8IPQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783015266 | 87 Count | 7 Count | 6 Count | 4.29 VDC | 0.14 VDC |
| 1783014941 | 85 Count | 6 Count | 5 Count | 4.24 VDC | 0.14 VDC |
| 1783014896 | 84 Count | 6 Count | 5 Count | 4.28 VDC | 0.16 VDC |
| 1783010255 | 6 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1783008657 | 973 Count | 445 Count | 240 Count | 4.16 VDC | 0.14 VDC |
| 1783008143 | 971 Count | 444 Count | 239 Count | 4.18 VDC | 0.14 VDC |
| 1783008102 | 970 Count | 444 Count | 239 Count | 4.2 VDC | 0.14 VDC |
| 1783008002 | 969 Count | 444 Count | 239 Count | 4.14 VDC | 0.14 VDC |
| 1783007938 | 968 Count | 444 Count | 239 Count | 4.18 VDC | 0.14 VDC |
| 1783007895 | 967 Count | 444 Count | 239 Count | 4.13 VDC | 0.14 VDC |
| 1783007312 | 958 Count | 441 Count | 236 Count | 4.21 VDC | 0.14 VDC |
| 1783007090 | 953 Count | 440 Count | 235 Count | 4.15 VDC | 0.14 VDC |
| 1783006995 | 951 Count | 439 Count | 234 Count | 4.12 VDC | 0.14 VDC |
| 1783006783 | 948 Count | 436 Count | 232 Count | 4.12 VDC | 0.14 VDC |
| 1783005805 | 946 Count | 425 Count | 228 Count | 4.21 VDC | 0.14 VDC |
| 1783005145 | 940 Count | 419 Count | 224 Count | 4.15 VDC | 0.14 VDC |
| 1783004977 | 938 Count | 417 Count | 223 Count | 4.2 VDC | 0.14 VDC |
| 1782997967 | 923 Count | 406 Count | 215 Count | 4.21 VDC | 0.14 VDC |
| 1782997843 | 921 Count | 404 Count | 214 Count | 4.15 VDC | 0.14 VDC |
| 1782995417 | 861 Count | 346 Count | 161 Count | 4.21 VDC | 0.14 VDC |
| 1782988205 | 844 Count | 333 Count | 148 Count | 4.14 VDC | 0.14 VDC |
| 1782987619 | 832 Count | 332 Count | 147 Count | 4.17 VDC | 0.14 VDC |
| 1782987596 | 829 Count | 330 Count | 145 Count | 4.18 VDC | 0.14 VDC |
| 1782935749 | 779 Count | 308 Count | 127 Count | 4.17 VDC | 0.14 VDC |
| 1782933161 | 751 Count | 305 Count | 125 Count | 4.16 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)