This is the latest recevied telemetry packets stored in our database for station/object SQ8IPQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785295846 | 245 Count | 195 Count | 0 Count | 0 VDC | 0 VDC |
| 1785294045 | 244 Count | 194 Count | 0 Count | 0 VDC | 0 VDC |
| 1785292244 | 243 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
| 1785290443 | 242 Count | 192 Count | 0 Count | 0 VDC | 0 VDC |
| 1785288643 | 241 Count | 191 Count | 0 Count | 0 VDC | 0 VDC |
| 1785286842 | 240 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1785286059 | 239 Count | 189 Count | 0 Count | 0 VDC | 0 VDC |
| 1785284258 | 238 Count | 188 Count | 0 Count | 0 VDC | 0 VDC |
| 1785282457 | 237 Count | 187 Count | 0 Count | 0 VDC | 0 VDC |
| 1785280656 | 236 Count | 186 Count | 0 Count | 0 VDC | 0 VDC |
| 1785278856 | 235 Count | 185 Count | 0 Count | 0 VDC | 0 VDC |
| 1785277055 | 234 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1785275254 | 233 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
| 1785273453 | 232 Count | 182 Count | 0 Count | 0 VDC | 0 VDC |
| 1785271653 | 231 Count | 181 Count | 0 Count | 0 VDC | 0 VDC |
| 1785269852 | 230 Count | 180 Count | 0 Count | 0 VDC | 0 VDC |
| 1785268055 | 229 Count | 179 Count | 0 Count | 0 VDC | 0 VDC |
| 1785266250 | 228 Count | 178 Count | 0 Count | 0 VDC | 0 VDC |
| 1785263438 | 227 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
| 1785261637 | 226 Count | 176 Count | 0 Count | 0 VDC | 0 VDC |
| 1785259837 | 225 Count | 175 Count | 0 Count | 0 VDC | 0 VDC |
| 1785258036 | 224 Count | 174 Count | 0 Count | 0 VDC | 0 VDC |
| 1785256249 | 223 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1785254435 | 222 Count | 172 Count | 0 Count | 0 VDC | 0 VDC |
| 1785252634 | 221 Count | 171 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)