This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776499053 | 695 Count | 506 Count | 244 Count | 4.18 VDC | 0.14 VDC |
| 1776495447 | 691 Count | 503 Count | 241 Count | 4.15 VDC | 0.14 VDC |
| 1776491842 | 686 Count | 492 Count | 237 Count | 4.22 VDC | 0.14 VDC |
| 1776488237 | 681 Count | 486 Count | 233 Count | 4.19 VDC | 0.14 VDC |
| 1776484632 | 679 Count | 485 Count | 232 Count | 4.13 VDC | 0.14 VDC |
| 1776481062 | 675 Count | 482 Count | 229 Count | 4.2 VDC | 0.14 VDC |
| 1776477456 | 671 Count | 479 Count | 226 Count | 4.14 VDC | 0.14 VDC |
| 1776473847 | 667 Count | 476 Count | 223 Count | 4.15 VDC | 0.14 VDC |
| 1776470242 | 666 Count | 476 Count | 223 Count | 4.2 VDC | 0.14 VDC |
| 1776466636 | 665 Count | 476 Count | 223 Count | 4.15 VDC | 0.14 VDC |
| 1776463031 | 664 Count | 476 Count | 223 Count | 4.18 VDC | 0.14 VDC |
| 1776459456 | 663 Count | 476 Count | 223 Count | 4.16 VDC | 0.14 VDC |
| 1776455850 | 662 Count | 476 Count | 223 Count | 4.14 VDC | 0.14 VDC |
| 1776452245 | 661 Count | 475 Count | 223 Count | 4.21 VDC | 0.14 VDC |
| 1776448640 | 660 Count | 475 Count | 223 Count | 4.16 VDC | 0.14 VDC |
| 1776445035 | 659 Count | 474 Count | 223 Count | 4.16 VDC | 0.14 VDC |
| 1776441430 | 658 Count | 474 Count | 223 Count | 4.15 VDC | 0.14 VDC |
| 1776437855 | 657 Count | 474 Count | 223 Count | 4.13 VDC | 0.14 VDC |
| 1776434250 | 656 Count | 474 Count | 223 Count | 4.18 VDC | 0.14 VDC |
| 1776430645 | 655 Count | 474 Count | 223 Count | 4.19 VDC | 0.14 VDC |
| 1776427039 | 654 Count | 472 Count | 223 Count | 4.18 VDC | 0.14 VDC |
| 1776423434 | 653 Count | 472 Count | 223 Count | 4.21 VDC | 0.14 VDC |
| 1776419829 | 652 Count | 472 Count | 223 Count | 4.14 VDC | 0.14 VDC |
| 1776416255 | 651 Count | 466 Count | 223 Count | 4.14 VDC | 0.14 VDC |
| 1776412649 | 650 Count | 466 Count | 223 Count | 4.17 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)