This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1788052011 | 461 Volts | 613 Deg.F | 325 | 0 | 0 |
| 1788051992 | 464 Volts | 611 Deg.F | 339 | 0 | 0 |
| 1788051967 | 462 Volts | 611 Deg.F | 347 | 0 | 0 |
| 1788051958 | 464 Volts | 610 Deg.F | 346 | 0 | 0 |
| 1788051946 | 460 Volts | 610 Deg.F | 354 | 0 | 0 |
| 1788051935 | 437 Volts | 610 Deg.F | 596 | 0 | 0 |
| 1788050470 | 461 Volts | 613 Deg.F | 315 | 0 | 0 |
| 1788050435 | 461 Volts | 612 Deg.F | 323 | 0 | 0 |
| 1788050333 | 469 Volts | 608 Deg.F | 334 | 0 | 0 |
| 1788050325 | 466 Volts | 608 Deg.F | 352 | 0 | 0 |
| 1788050319 | 468 Volts | 608 Deg.F | 588 | 0 | 0 |
| 1788033193 | 458 Volts | 630 Deg.F | 317 | 0 | 0 |
| 1788033181 | 465 Volts | 630 Deg.F | 323 | 0 | 0 |
| 1788032787 | 458 Volts | 628 Deg.F | 319 | 0 | 0 |
| 1788027347 | 462 Volts | 629 Deg.F | 309 | 0 | 0 |
| 1788027327 | 465 Volts | 629 Deg.F | 320 | 0 | 0 |
| 1788027293 | 468 Volts | 628 Deg.F | 329 | 0 | 0 |
| 1788027114 | 466 Volts | 622 Deg.F | 313 | 0 | 0 |
| 1788027108 | 470 Volts | 622 Deg.F | 327 | 0 | 0 |
| 1788027101 | 464 Volts | 622 Deg.F | 325 | 0 | 0 |
| 1788027094 | 455 Volts | 622 Deg.F | 320 | 0 | 0 |
| 1788027088 | 472 Volts | 622 Deg.F | 343 | 0 | 0 |
| 1788027078 | 469 Volts | 621 Deg.F | 342 | 0 | 0 |
| 1788026164 | 470 Volts | 618 Deg.F | 585 | 0 | 0 |
| 1787970980 | 457 Volts | 608 Deg.F | 328 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)