This is the latest recevied telemetry packets stored in our database for station/object ON4CDR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785071266 | 67 Count | 135 Count | 0 Count | 0 VDC | 0 VDC |
| 1785070362 | 52 Count | 103 Count | 0 Count | 0 VDC | 0 VDC |
| 1785069460 | 32 Count | 70 Count | 0 Count | 0 VDC | 0 VDC |
| 1785068557 | 17 Count | 33 Count | 0 Count | 0 VDC | 0 VDC |
| 1785067653 | 440 Count | 1022 Count | 0 Count | 0 VDC | 0 VDC |
| 1785066750 | 425 Count | 992 Count | 0 Count | 0 VDC | 0 VDC |
| 1785065847 | 407 Count | 955 Count | 0 Count | 0 VDC | 0 VDC |
| 1785064943 | 391 Count | 918 Count | 0 Count | 0 VDC | 0 VDC |
| 1785064111 | 373 Count | 879 Count | 0 Count | 0 VDC | 0 VDC |
| 1785063208 | 357 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1785062305 | 337 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1785061402 | 322 Count | 781 Count | 0 Count | 0 VDC | 0 VDC |
| 1785060499 | 302 Count | 747 Count | 0 Count | 0 VDC | 0 VDC |
| 1785059595 | 287 Count | 718 Count | 0 Count | 0 VDC | 0 VDC |
| 1785058692 | 270 Count | 681 Count | 0 Count | 0 VDC | 0 VDC |
| 1785057789 | 254 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
| 1785056887 | 237 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1785055984 | 222 Count | 581 Count | 0 Count | 0 VDC | 0 VDC |
| 1785055081 | 204 Count | 543 Count | 0 Count | 0 VDC | 0 VDC |
| 1785054178 | 189 Count | 514 Count | 0 Count | 0 VDC | 0 VDC |
| 1785053275 | 171 Count | 477 Count | 0 Count | 0 VDC | 0 VDC |
| 1785052372 | 156 Count | 439 Count | 0 Count | 0 VDC | 0 VDC |
| 1785051469 | 139 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1785050566 | 123 Count | 368 Count | 0 Count | 0 VDC | 0 VDC |
| 1785049663 | 107 Count | 313 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)