This is the latest recevied telemetry packets stored in our database for station/object F5ZMX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783641829 | 327 Count | 988 Count | 262 Count | 0 VDC | 0 VDC |
| 1783640926 | 322 Count | 976 Count | 258 Count | 0 VDC | 0 VDC |
| 1783640022 | 318 Count | 965 Count | 255 Count | 0 VDC | 0 VDC |
| 1783639119 | 314 Count | 954 Count | 252 Count | 0 VDC | 0 VDC |
| 1783638216 | 311 Count | 944 Count | 250 Count | 0 VDC | 0 VDC |
| 1783637312 | 307 Count | 935 Count | 247 Count | 0 VDC | 0 VDC |
| 1783636409 | 303 Count | 925 Count | 244 Count | 0 VDC | 0 VDC |
| 1783635505 | 300 Count | 913 Count | 242 Count | 0 VDC | 0 VDC |
| 1783634601 | 296 Count | 904 Count | 239 Count | 0 VDC | 0 VDC |
| 1783633698 | 292 Count | 892 Count | 236 Count | 0 VDC | 0 VDC |
| 1783632794 | 288 Count | 884 Count | 233 Count | 0 VDC | 0 VDC |
| 1783631891 | 284 Count | 875 Count | 230 Count | 0 VDC | 0 VDC |
| 1783630988 | 280 Count | 867 Count | 227 Count | 0 VDC | 0 VDC |
| 1783630084 | 276 Count | 858 Count | 224 Count | 0 VDC | 0 VDC |
| 1783629181 | 273 Count | 850 Count | 222 Count | 0 VDC | 0 VDC |
| 1783628278 | 269 Count | 842 Count | 219 Count | 0 VDC | 0 VDC |
| 1783627374 | 265 Count | 834 Count | 216 Count | 0 VDC | 0 VDC |
| 1783626471 | 261 Count | 824 Count | 213 Count | 0 VDC | 0 VDC |
| 1783625567 | 257 Count | 815 Count | 210 Count | 0 VDC | 0 VDC |
| 1783624664 | 253 Count | 807 Count | 207 Count | 0 VDC | 0 VDC |
| 1783623761 | 250 Count | 797 Count | 205 Count | 0 VDC | 0 VDC |
| 1783622857 | 246 Count | 789 Count | 202 Count | 0 VDC | 0 VDC |
| 1783621954 | 242 Count | 781 Count | 199 Count | 0 VDC | 0 VDC |
| 1783621051 | 237 Count | 743 Count | 195 Count | 0 VDC | 0 VDC |
| 1783620228 | 232 Count | 723 Count | 191 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)