This is the latest recevied telemetry packets stored in our database for station/object SQ9IKM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783190857 | 9 Count | 56 Count | 5 Count | 0 VDC | 0 VDC |
| 1783189957 | 7 Count | 46 Count | 4 Count | 0 VDC | 0 VDC |
| 1783189056 | 5 Count | 34 Count | 3 Count | 0 VDC | 0 VDC |
| 1783188155 | 3 Count | 19 Count | 2 Count | 0 VDC | 0 VDC |
| 1783187255 | 1 Count | 9 Count | 1 Count | 0 VDC | 0 VDC |
| 1783186354 | 262 Count | 1001 Count | 173 Count | 0 VDC | 0 VDC |
| 1783185453 | 261 Count | 995 Count | 173 Count | 0 VDC | 0 VDC |
| 1783184553 | 259 Count | 986 Count | 172 Count | 0 VDC | 0 VDC |
| 1783183652 | 258 Count | 984 Count | 172 Count | 0 VDC | 0 VDC |
| 1783182751 | 256 Count | 978 Count | 171 Count | 0 VDC | 0 VDC |
| 1783181851 | 255 Count | 976 Count | 171 Count | 0 VDC | 0 VDC |
| 1783180951 | 254 Count | 975 Count | 171 Count | 0 VDC | 0 VDC |
| 1783180050 | 253 Count | 973 Count | 171 Count | 0 VDC | 0 VDC |
| 1783179149 | 252 Count | 969 Count | 171 Count | 0 VDC | 0 VDC |
| 1783178248 | 251 Count | 966 Count | 171 Count | 0 VDC | 0 VDC |
| 1783177348 | 250 Count | 964 Count | 171 Count | 0 VDC | 0 VDC |
| 1783176447 | 248 Count | 959 Count | 170 Count | 0 VDC | 0 VDC |
| 1783175547 | 246 Count | 956 Count | 169 Count | 0 VDC | 0 VDC |
| 1783174645 | 244 Count | 951 Count | 168 Count | 0 VDC | 0 VDC |
| 1783173743 | 242 Count | 946 Count | 167 Count | 0 VDC | 0 VDC |
| 1783172843 | 241 Count | 944 Count | 167 Count | 0 VDC | 0 VDC |
| 1783171959 | 240 Count | 939 Count | 167 Count | 0 VDC | 0 VDC |
| 1783171059 | 239 Count | 937 Count | 167 Count | 0 VDC | 0 VDC |
| 1783170157 | 238 Count | 932 Count | 167 Count | 0 VDC | 0 VDC |
| 1783169256 | 235 Count | 928 Count | 165 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)