This is the latest recevied telemetry packets stored in our database for station/object SQ9IKM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793320969 | 262 Count | 790 Count | 184 Count | 0 VDC | 0 VDC |
| 1793320068 | 259 Count | 777 Count | 182 Count | 0 VDC | 0 VDC |
| 1793319168 | 256 Count | 769 Count | 180 Count | 0 VDC | 0 VDC |
| 1793318267 | 252 Count | 758 Count | 177 Count | 0 VDC | 0 VDC |
| 1793317366 | 249 Count | 751 Count | 175 Count | 0 VDC | 0 VDC |
| 1793316466 | 245 Count | 741 Count | 172 Count | 0 VDC | 0 VDC |
| 1793315565 | 241 Count | 731 Count | 169 Count | 0 VDC | 0 VDC |
| 1793314664 | 238 Count | 723 Count | 167 Count | 0 VDC | 0 VDC |
| 1793313764 | 235 Count | 715 Count | 165 Count | 0 VDC | 0 VDC |
| 1793312863 | 233 Count | 705 Count | 164 Count | 0 VDC | 0 VDC |
| 1793311963 | 231 Count | 698 Count | 163 Count | 0 VDC | 0 VDC |
| 1793311062 | 228 Count | 689 Count | 161 Count | 0 VDC | 0 VDC |
| 1793310161 | 224 Count | 679 Count | 158 Count | 0 VDC | 0 VDC |
| 1793309261 | 220 Count | 669 Count | 155 Count | 0 VDC | 0 VDC |
| 1793308376 | 216 Count | 655 Count | 152 Count | 0 VDC | 0 VDC |
| 1793307475 | 213 Count | 646 Count | 150 Count | 0 VDC | 0 VDC |
| 1793306575 | 210 Count | 637 Count | 148 Count | 0 VDC | 0 VDC |
| 1793305674 | 207 Count | 624 Count | 146 Count | 0 VDC | 0 VDC |
| 1793304773 | 203 Count | 614 Count | 143 Count | 0 VDC | 0 VDC |
| 1793303873 | 200 Count | 606 Count | 141 Count | 0 VDC | 0 VDC |
| 1793302071 | 192 Count | 590 Count | 135 Count | 0 VDC | 0 VDC |
| 1793301171 | 189 Count | 582 Count | 133 Count | 0 VDC | 0 VDC |
| 1793300270 | 185 Count | 573 Count | 130 Count | 0 VDC | 0 VDC |
| 1793299369 | 180 Count | 564 Count | 126 Count | 0 VDC | 0 VDC |
| 1793298469 | 177 Count | 554 Count | 124 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)