This is the latest recevied telemetry packets stored in our database for station/object SR2GG-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776357297 | 64 Count | 520 Count | 49 Count | 4.21 VDC | 0 VDC |
| 1776355857 | 60 Count | 488 Count | 46 Count | 4.21 VDC | 0 VDC |
| 1776354415 | 57 Count | 455 Count | 44 Count | 4.21 VDC | 0 VDC |
| 1776352975 | 53 Count | 424 Count | 41 Count | 4.21 VDC | 0 VDC |
| 1776351534 | 49 Count | 388 Count | 38 Count | 4.21 VDC | 0 VDC |
| 1776350093 | 41 Count | 348 Count | 31 Count | 4.21 VDC | 0 VDC |
| 1776348652 | 38 Count | 299 Count | 29 Count | 4.21 VDC | 0 VDC |
| 1776347222 | 34 Count | 272 Count | 26 Count | 4.21 VDC | 0 VDC |
| 1776345781 | 31 Count | 248 Count | 24 Count | 4.22 VDC | 0 VDC |
| 1776344340 | 26 Count | 215 Count | 20 Count | 4.21 VDC | 0 VDC |
| 1776342900 | 22 Count | 189 Count | 17 Count | 4.21 VDC | 0 VDC |
| 1776341459 | 19 Count | 164 Count | 15 Count | 4.21 VDC | 0 VDC |
| 1776340018 | 15 Count | 133 Count | 12 Count | 4.21 VDC | 0 VDC |
| 1776338577 | 12 Count | 104 Count | 10 Count | 4.21 VDC | 0 VDC |
| 1776337136 | 8 Count | 74 Count | 7 Count | 4.21 VDC | 0 VDC |
| 1776335696 | 3 Count | 32 Count | 3 Count | 4.21 VDC | 0 VDC |
| 1776334255 | 110 Count | 1023 Count | 89 Count | 4.21 VDC | 0 VDC |
| 1776332814 | 106 Count | 992 Count | 86 Count | 4.21 VDC | 0 VDC |
| 1776331373 | 103 Count | 961 Count | 84 Count | 4.21 VDC | 0 VDC |
| 1776329933 | 99 Count | 927 Count | 81 Count | 4.21 VDC | 0 VDC |
| 1776328492 | 93 Count | 889 Count | 76 Count | 4.21 VDC | 0 VDC |
| 1776327051 | 89 Count | 856 Count | 73 Count | 4.21 VDC | 0 VDC |
| 1776325621 | 84 Count | 824 Count | 69 Count | 4.21 VDC | 0 VDC |
| 1776324181 | 80 Count | 805 Count | 66 Count | 4.21 VDC | 0 VDC |
| 1776322740 | 76 Count | 774 Count | 63 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)