This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770173834 | 508 Volts | 555 Deg.F | 0 | 0 | 0 |
| 1770172040 | 512 Volts | 556 Deg.F | 0 | 0 | 0 |
| 1770170245 | 496 Volts | 557 Deg.F | 0 | 0 | 0 |
| 1770168452 | 452 Volts | 559 Deg.F | 0 | 0 | 0 |
| 1770166658 | 488 Volts | 560 Deg.F | 0 | 0 | 0 |
| 1770164864 | 455 Volts | 562 Deg.F | 0 | 0 | 0 |
| 1770163071 | 491 Volts | 562 Deg.F | 0 | 0 | 0 |
| 1770161277 | 453 Volts | 564 Deg.F | 0 | 0 | 0 |
| 1770160380 | 446 Volts | 564 Deg.F | 0 | 0 | 0 |
| 1770159483 | 484 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1770157690 | 455 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1770155897 | 488 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1770154104 | 454 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1770152310 | 486 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1770150516 | 454 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1770120002 | 453 Volts | 543 Deg.F | 0 | 0 | 0 |
| 1770118206 | 516 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1770116410 | 514 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1770115512 | 441 Volts | 544 Deg.F | 0 | 0 | 0 |
| 1770114614 | 512 Volts | 545 Deg.F | 0 | 0 | 0 |
| 1770112819 | 514 Volts | 546 Deg.F | 0 | 0 | 0 |
| 1770111023 | 503 Volts | 547 Deg.F | 0 | 0 | 0 |
| 1770109228 | 510 Volts | 548 Deg.F | 0 | 0 | 0 |
| 1770107432 | 509 Volts | 548 Deg.F | 0 | 0 | 0 |
| 1770105637 | 514 Volts | 550 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)