This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794968763 | 470 Volts | 578 Deg.F | 0 | 0 | 0 |
| 1794966072 | 468 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1794964277 | 465 Volts | 581 Deg.F | 0 | 0 | 0 |
| 1794959790 | 459 Volts | 583 Deg.F | 0 | 0 | 0 |
| 1794949025 | 468 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1794948128 | 466 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1794946334 | 461 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1794941849 | 452 Volts | 589 Deg.F | 0 | 0 | 0 |
| 1794680626 | 498 Volts | 578 Deg.F | 0 | 0 | 0 |
| 1794680516 | 496 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1794679962 | 499 Volts | 575 Deg.F | 0 | 0 | 0 |
| 1794623979 | 494 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1794623845 | 497 Volts | 587 Deg.F | 0 | 0 | 0 |
| 1794623750 | 497 Volts | 587 Deg.F | 0 | 0 | 0 |
| 1794623745 | 484 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1794623665 | 497 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1794623391 | 498 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1794623001 | 491 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1794622959 | 490 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1794622874 | 489 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1794622796 | 500 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1794622778 | 496 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1794622773 | 493 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1794622745 | 484 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1794622704 | 495 Volts | 584 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)