This is the latest recevied telemetry packets stored in our database for station/object M0MXL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773491281 | 636 Count | 679 Count | 499 Count | 0 VDC | 0 VDC |
| 1773489478 | 631 Count | 673 Count | 495 Count | 0 VDC | 0 VDC |
| 1773487674 | 627 Count | 668 Count | 492 Count | 0 VDC | 0 VDC |
| 1773485917 | 622 Count | 662 Count | 488 Count | 0 VDC | 0 VDC |
| 1773484113 | 618 Count | 657 Count | 485 Count | 0 VDC | 0 VDC |
| 1773482309 | 613 Count | 651 Count | 481 Count | 0 VDC | 0 VDC |
| 1773480505 | 609 Count | 646 Count | 478 Count | 0 VDC | 0 VDC |
| 1773478701 | 604 Count | 640 Count | 474 Count | 0 VDC | 0 VDC |
| 1773476901 | 600 Count | 635 Count | 471 Count | 0 VDC | 0 VDC |
| 1773475097 | 595 Count | 629 Count | 467 Count | 0 VDC | 0 VDC |
| 1773473293 | 591 Count | 624 Count | 464 Count | 0 VDC | 0 VDC |
| 1773471489 | 586 Count | 618 Count | 460 Count | 0 VDC | 0 VDC |
| 1773469685 | 582 Count | 613 Count | 457 Count | 0 VDC | 0 VDC |
| 1773467881 | 577 Count | 607 Count | 453 Count | 0 VDC | 0 VDC |
| 1773466077 | 573 Count | 602 Count | 450 Count | 0 VDC | 0 VDC |
| 1773464317 | 568 Count | 596 Count | 446 Count | 0 VDC | 0 VDC |
| 1773462513 | 564 Count | 591 Count | 443 Count | 0 VDC | 0 VDC |
| 1773460709 | 559 Count | 585 Count | 439 Count | 0 VDC | 0 VDC |
| 1773458905 | 555 Count | 580 Count | 436 Count | 0 VDC | 0 VDC |
| 1773457101 | 550 Count | 574 Count | 432 Count | 0 VDC | 0 VDC |
| 1773455297 | 546 Count | 569 Count | 429 Count | 0 VDC | 0 VDC |
| 1773453493 | 541 Count | 563 Count | 425 Count | 0 VDC | 0 VDC |
| 1773451689 | 537 Count | 558 Count | 422 Count | 0 VDC | 0 VDC |
| 1773449885 | 532 Count | 552 Count | 418 Count | 0 VDC | 0 VDC |
| 1773448081 | 523 Count | 542 Count | 410 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)