This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782072785 | 427 Count | 733 Count | 327 Count | 4.2 VDC | 0.14 VDC |
| 1782070977 | 419 Count | 712 Count | 321 Count | 4.23 VDC | 0.14 VDC |
| 1782069169 | 410 Count | 693 Count | 314 Count | 4.23 VDC | 0.14 VDC |
| 1782045857 | 288 Count | 488 Count | 218 Count | 4.2 VDC | 0.14 VDC |
| 1782044049 | 280 Count | 475 Count | 212 Count | 4.25 VDC | 0.14 VDC |
| 1782042239 | 273 Count | 461 Count | 207 Count | 4.2 VDC | 0.14 VDC |
| 1782040431 | 265 Count | 448 Count | 201 Count | 4.19 VDC | 0.14 VDC |
| 1782038623 | 257 Count | 436 Count | 195 Count | 4.23 VDC | 0.14 VDC |
| 1782036815 | 250 Count | 425 Count | 190 Count | 4.25 VDC | 0.14 VDC |
| 1782035007 | 243 Count | 414 Count | 185 Count | 4.26 VDC | 0.14 VDC |
| 1782033198 | 235 Count | 405 Count | 179 Count | 4.25 VDC | 0.14 VDC |
| 1782031390 | 227 Count | 395 Count | 173 Count | 4.23 VDC | 0.14 VDC |
| 1782029582 | 221 Count | 384 Count | 169 Count | 4.23 VDC | 0.14 VDC |
| 1782027774 | 213 Count | 373 Count | 163 Count | 4.24 VDC | 0.14 VDC |
| 1782025966 | 201 Count | 357 Count | 153 Count | 4.23 VDC | 0.14 VDC |
| 1782024256 | 193 Count | 346 Count | 147 Count | 4.26 VDC | 0.16 VDC |
| 1782022448 | 185 Count | 333 Count | 141 Count | 4.2 VDC | 0.16 VDC |
| 1782020640 | 177 Count | 320 Count | 135 Count | 4.23 VDC | 0.16 VDC |
| 1782018832 | 169 Count | 306 Count | 129 Count | 4.23 VDC | 0.16 VDC |
| 1782017023 | 160 Count | 291 Count | 122 Count | 4.2 VDC | 0.14 VDC |
| 1782015215 | 152 Count | 275 Count | 116 Count | 4.26 VDC | 0.16 VDC |
| 1782013407 | 143 Count | 255 Count | 109 Count | 4.21 VDC | 0.14 VDC |
| 1782011599 | 135 Count | 243 Count | 103 Count | 4.25 VDC | 0.16 VDC |
| 1782009790 | 128 Count | 232 Count | 98 Count | 4.23 VDC | 0.16 VDC |
| 1782007982 | 120 Count | 220 Count | 92 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)