This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787040121 | 187 Count | 426 Count | 143 Count | 4.19 VDC | 0.16 VDC |
| 1786960934 | 186 Count | 426 Count | 143 Count | 4.23 VDC | 0.14 VDC |
| 1786959125 | 177 Count | 406 Count | 136 Count | 4.24 VDC | 0.14 VDC |
| 1786957414 | 169 Count | 390 Count | 130 Count | 4.24 VDC | 0.14 VDC |
| 1786955606 | 161 Count | 372 Count | 124 Count | 4.26 VDC | 0.14 VDC |
| 1786953798 | 153 Count | 353 Count | 118 Count | 4.25 VDC | 0.14 VDC |
| 1786951989 | 144 Count | 334 Count | 111 Count | 4.24 VDC | 0.16 VDC |
| 1786950181 | 136 Count | 311 Count | 105 Count | 4.23 VDC | 0.14 VDC |
| 1786948373 | 127 Count | 291 Count | 98 Count | 4.23 VDC | 0.16 VDC |
| 1786946565 | 119 Count | 266 Count | 92 Count | 4.25 VDC | 0.16 VDC |
| 1786944757 | 110 Count | 244 Count | 85 Count | 4.25 VDC | 0.14 VDC |
| 1786942948 | 102 Count | 226 Count | 79 Count | 4.26 VDC | 0.14 VDC |
| 1786941140 | 94 Count | 206 Count | 73 Count | 4.25 VDC | 0.14 VDC |
| 1786939332 | 86 Count | 189 Count | 67 Count | 4.23 VDC | 0.14 VDC |
| 1786937524 | 77 Count | 169 Count | 60 Count | 4.23 VDC | 0.14 VDC |
| 1786935820 | 69 Count | 153 Count | 54 Count | 4.22 VDC | 0.14 VDC |
| 1786934011 | 57 Count | 131 Count | 44 Count | 4.25 VDC | 0.14 VDC |
| 1786932203 | 49 Count | 114 Count | 38 Count | 4.22 VDC | 0.14 VDC |
| 1786930395 | 40 Count | 93 Count | 31 Count | 4.23 VDC | 0.14 VDC |
| 1786924970 | 15 Count | 41 Count | 12 Count | 4.24 VDC | 0.14 VDC |
| 1786923162 | 7 Count | 23 Count | 6 Count | 4.2 VDC | 0.14 VDC |
| 1786919545 | 463 Count | 982 Count | 354 Count | 4.23 VDC | 0.14 VDC |
| 1786917737 | 455 Count | 965 Count | 348 Count | 4.23 VDC | 0.14 VDC |
| 1786915929 | 446 Count | 943 Count | 341 Count | 4.23 VDC | 0.14 VDC |
| 1786914214 | 438 Count | 925 Count | 335 Count | 4.22 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)