This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777415722 | 434 Count | 835 Count | 381 Count | 4.25 VDC | 0.16 VDC |
| 1777412114 | 420 Count | 812 Count | 369 Count | 4.23 VDC | 0.16 VDC |
| 1777408554 | 406 Count | 788 Count | 357 Count | 4.23 VDC | 0.16 VDC |
| 1777404945 | 392 Count | 767 Count | 345 Count | 4.24 VDC | 0.16 VDC |
| 1777401337 | 377 Count | 743 Count | 332 Count | 4.25 VDC | 0.16 VDC |
| 1777397728 | 363 Count | 708 Count | 320 Count | 4.25 VDC | 0.16 VDC |
| 1777394120 | 348 Count | 679 Count | 307 Count | 4.26 VDC | 0.14 VDC |
| 1777390512 | 334 Count | 650 Count | 295 Count | 4.21 VDC | 0.16 VDC |
| 1777386950 | 320 Count | 619 Count | 283 Count | 4.2 VDC | 0.14 VDC |
| 1777383341 | 306 Count | 594 Count | 271 Count | 4.2 VDC | 0.16 VDC |
| 1777379733 | 292 Count | 567 Count | 259 Count | 4.21 VDC | 0.16 VDC |
| 1777376125 | 263 Count | 502 Count | 232 Count | 4.26 VDC | 0.16 VDC |
| 1777372517 | 223 Count | 439 Count | 194 Count | 4.2 VDC | 0.14 VDC |
| 1777368908 | 208 Count | 414 Count | 181 Count | 4.2 VDC | 0.14 VDC |
| 1777365348 | 197 Count | 395 Count | 172 Count | 4.23 VDC | 0.14 VDC |
| 1777361739 | 167 Count | 351 Count | 144 Count | 4.23 VDC | 0.16 VDC |
| 1777358131 | 151 Count | 312 Count | 130 Count | 4.2 VDC | 0.16 VDC |
| 1777354523 | 137 Count | 284 Count | 118 Count | 4.25 VDC | 0.16 VDC |
| 1777350915 | 123 Count | 258 Count | 106 Count | 4.25 VDC | 0.16 VDC |
| 1777347307 | 109 Count | 232 Count | 94 Count | 4.23 VDC | 0.16 VDC |
| 1777343747 | 96 Count | 208 Count | 83 Count | 4.25 VDC | 0.16 VDC |
| 1777340138 | 79 Count | 180 Count | 68 Count | 4.26 VDC | 0.16 VDC |
| 1777336530 | 64 Count | 152 Count | 55 Count | 4.24 VDC | 0.16 VDC |
| 1777332922 | 51 Count | 121 Count | 44 Count | 4.23 VDC | 0.16 VDC |
| 1777329314 | 38 Count | 91 Count | 33 Count | 4.21 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)