This is the latest recevied telemetry packets stored in our database for station/object F5ZZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782065639 | 569 Count | 854 Count | 333 Count | 0 VDC | 0 VDC |
| 1782065033 | 568 Count | 852 Count | 333 Count | 0 VDC | 0 VDC |
| 1782064651 | 566 Count | 850 Count | 332 Count | 0 VDC | 0 VDC |
| 1782064045 | 565 Count | 848 Count | 332 Count | 0 VDC | 0 VDC |
| 1782063439 | 563 Count | 846 Count | 331 Count | 0 VDC | 0 VDC |
| 1782062833 | 561 Count | 844 Count | 330 Count | 0 VDC | 0 VDC |
| 1782062226 | 560 Count | 842 Count | 330 Count | 0 VDC | 0 VDC |
| 1782061620 | 558 Count | 840 Count | 329 Count | 0 VDC | 0 VDC |
| 1782061014 | 556 Count | 838 Count | 328 Count | 0 VDC | 0 VDC |
| 1782060408 | 555 Count | 837 Count | 328 Count | 0 VDC | 0 VDC |
| 1782059802 | 553 Count | 835 Count | 327 Count | 0 VDC | 0 VDC |
| 1782059195 | 551 Count | 834 Count | 326 Count | 0 VDC | 0 VDC |
| 1782058589 | 550 Count | 833 Count | 326 Count | 0 VDC | 0 VDC |
| 1782057983 | 548 Count | 831 Count | 325 Count | 0 VDC | 0 VDC |
| 1782057377 | 547 Count | 831 Count | 325 Count | 0 VDC | 0 VDC |
| 1782056771 | 546 Count | 830 Count | 325 Count | 0 VDC | 0 VDC |
| 1782056164 | 544 Count | 828 Count | 324 Count | 0 VDC | 0 VDC |
| 1782055558 | 542 Count | 827 Count | 323 Count | 0 VDC | 0 VDC |
| 1782054952 | 541 Count | 826 Count | 323 Count | 0 VDC | 0 VDC |
| 1782054343 | 539 Count | 824 Count | 322 Count | 0 VDC | 0 VDC |
| 1782053737 | 537 Count | 823 Count | 321 Count | 0 VDC | 0 VDC |
| 1782053131 | 535 Count | 821 Count | 320 Count | 0 VDC | 0 VDC |
| 1782052525 | 534 Count | 820 Count | 320 Count | 0 VDC | 0 VDC |
| 1782051919 | 532 Count | 819 Count | 319 Count | 0 VDC | 0 VDC |
| 1782051313 | 530 Count | 817 Count | 318 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)