This is the latest recevied telemetry packets stored in our database for station/object F5ZZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776857486 | 45 Count | 99 Count | 23 Count | 0 VDC | 0 VDC |
| 1776856874 | 31 Count | 74 Count | 16 Count | 0 VDC | 0 VDC |
| 1776856268 | 28 Count | 66 Count | 15 Count | 0 VDC | 0 VDC |
| 1776855662 | 24 Count | 54 Count | 13 Count | 0 VDC | 0 VDC |
| 1776855056 | 18 Count | 38 Count | 10 Count | 0 VDC | 0 VDC |
| 1776854449 | 13 Count | 31 Count | 7 Count | 0 VDC | 0 VDC |
| 1776853843 | 8 Count | 22 Count | 5 Count | 0 VDC | 0 VDC |
| 1776853237 | 3 Count | 6 Count | 2 Count | 0 VDC | 0 VDC |
| 1776852856 | 535 Count | 1010 Count | 338 Count | 0 VDC | 0 VDC |
| 1776852249 | 531 Count | 1000 Count | 336 Count | 0 VDC | 0 VDC |
| 1776851642 | 526 Count | 990 Count | 333 Count | 0 VDC | 0 VDC |
| 1776851036 | 522 Count | 977 Count | 331 Count | 0 VDC | 0 VDC |
| 1776850430 | 518 Count | 966 Count | 329 Count | 0 VDC | 0 VDC |
| 1776849824 | 513 Count | 957 Count | 326 Count | 0 VDC | 0 VDC |
| 1776849218 | 509 Count | 945 Count | 324 Count | 0 VDC | 0 VDC |
| 1776848611 | 505 Count | 936 Count | 322 Count | 0 VDC | 0 VDC |
| 1776848005 | 500 Count | 926 Count | 319 Count | 0 VDC | 0 VDC |
| 1776847399 | 495 Count | 913 Count | 316 Count | 0 VDC | 0 VDC |
| 1776846793 | 491 Count | 900 Count | 314 Count | 0 VDC | 0 VDC |
| 1776846187 | 486 Count | 893 Count | 311 Count | 0 VDC | 0 VDC |
| 1776845580 | 481 Count | 885 Count | 308 Count | 0 VDC | 0 VDC |
| 1776844974 | 477 Count | 878 Count | 306 Count | 0 VDC | 0 VDC |
| 1776844368 | 472 Count | 869 Count | 303 Count | 0 VDC | 0 VDC |
| 1776843762 | 467 Count | 859 Count | 300 Count | 0 VDC | 0 VDC |
| 1776843156 | 463 Count | 853 Count | 298 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)