This is the latest recevied telemetry packets stored in our database for station/object F1MCO-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776499163 | 55 Count | 753 Count | 0 Count | 0 VDC | 0 VDC |
| 1776497359 | 54 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1776495556 | 53 Count | 722 Count | 0 Count | 0 VDC | 0 VDC |
| 1776493795 | 48 Count | 699 Count | 0 Count | 0 VDC | 0 VDC |
| 1776491991 | 47 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1776490187 | 46 Count | 659 Count | 0 Count | 0 VDC | 0 VDC |
| 1776482972 | 42 Count | 579 Count | 0 Count | 0 VDC | 0 VDC |
| 1776481168 | 41 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1776472192 | 32 Count | 489 Count | 0 Count | 0 VDC | 0 VDC |
| 1776470388 | 31 Count | 475 Count | 0 Count | 0 VDC | 0 VDC |
| 1776468585 | 30 Count | 471 Count | 0 Count | 0 VDC | 0 VDC |
| 1776464977 | 28 Count | 447 Count | 0 Count | 0 VDC | 0 VDC |
| 1776463173 | 27 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1776461369 | 26 Count | 426 Count | 0 Count | 0 VDC | 0 VDC |
| 1776457761 | 24 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1776455958 | 23 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
| 1776452350 | 21 Count | 324 Count | 0 Count | 0 VDC | 0 VDC |
| 1776450589 | 16 Count | 304 Count | 0 Count | 0 VDC | 0 VDC |
| 1776448785 | 15 Count | 267 Count | 0 Count | 0 VDC | 0 VDC |
| 1776446982 | 14 Count | 245 Count | 0 Count | 0 VDC | 0 VDC |
| 1776445178 | 13 Count | 225 Count | 0 Count | 0 VDC | 0 VDC |
| 1776443374 | 12 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1776441570 | 11 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
| 1776439766 | 10 Count | 156 Count | 0 Count | 0 VDC | 0 VDC |
| 1776436158 | 8 Count | 116 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)