This is the latest recevied telemetry packets stored in our database for station/object EA7DW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788103123 | 308 Count | 134 Count | 6 Count | 4.19 VDC | 0.14 VDC |
| 1788102516 | 306 Count | 134 Count | 6 Count | 4.18 VDC | 0.14 VDC |
| 1788101909 | 304 Count | 134 Count | 6 Count | 4.15 VDC | 0.14 VDC |
| 1788101302 | 302 Count | 131 Count | 6 Count | 4.22 VDC | 0.14 VDC |
| 1788100695 | 300 Count | 129 Count | 6 Count | 4.21 VDC | 0.14 VDC |
| 1788100088 | 298 Count | 129 Count | 6 Count | 4.19 VDC | 0.14 VDC |
| 1788099482 | 296 Count | 126 Count | 6 Count | 4.23 VDC | 0.14 VDC |
| 1788098875 | 294 Count | 124 Count | 6 Count | 4.21 VDC | 0.14 VDC |
| 1788098268 | 292 Count | 124 Count | 6 Count | 4.22 VDC | 0.14 VDC |
| 1788097661 | 290 Count | 120 Count | 6 Count | 4.18 VDC | 0.14 VDC |
| 1788097054 | 288 Count | 119 Count | 6 Count | 4.22 VDC | 0.14 VDC |
| 1788096447 | 286 Count | 119 Count | 6 Count | 4.17 VDC | 0.14 VDC |
| 1788095841 | 284 Count | 116 Count | 6 Count | 4.23 VDC | 0.14 VDC |
| 1788095234 | 282 Count | 116 Count | 6 Count | 4.21 VDC | 0.14 VDC |
| 1788094627 | 280 Count | 115 Count | 6 Count | 4.23 VDC | 0.14 VDC |
| 1788094020 | 278 Count | 112 Count | 6 Count | 4.22 VDC | 0.14 VDC |
| 1788093413 | 276 Count | 112 Count | 6 Count | 4.16 VDC | 0.14 VDC |
| 1788092806 | 274 Count | 111 Count | 6 Count | 4.17 VDC | 0.14 VDC |
| 1788092199 | 272 Count | 107 Count | 6 Count | 4.19 VDC | 0.14 VDC |
| 1788091592 | 270 Count | 107 Count | 6 Count | 4.22 VDC | 0.14 VDC |
| 1788090985 | 268 Count | 107 Count | 6 Count | 4.23 VDC | 0.14 VDC |
| 1788090378 | 266 Count | 107 Count | 6 Count | 4.18 VDC | 0.14 VDC |
| 1788089771 | 264 Count | 107 Count | 6 Count | 4.23 VDC | 0.14 VDC |
| 1788089164 | 262 Count | 107 Count | 6 Count | 4.22 VDC | 0.14 VDC |
| 1788088558 | 260 Count | 106 Count | 6 Count | 4.15 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)