This is the latest recevied telemetry packets stored in our database for station/object EA7DW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789368465 | 781 Count | 294 Count | 10 Count | 4.21 VDC | 0.14 VDC |
| 1789367858 | 779 Count | 294 Count | 10 Count | 4.19 VDC | 0.14 VDC |
| 1789367250 | 777 Count | 293 Count | 10 Count | 4.15 VDC | 0.14 VDC |
| 1789366642 | 775 Count | 292 Count | 10 Count | 4.2 VDC | 0.14 VDC |
| 1789366035 | 773 Count | 292 Count | 10 Count | 4.25 VDC | 0.14 VDC |
| 1789365427 | 771 Count | 291 Count | 10 Count | 4.14 VDC | 0.14 VDC |
| 1789364819 | 769 Count | 290 Count | 10 Count | 4.21 VDC | 0.14 VDC |
| 1789364211 | 767 Count | 289 Count | 10 Count | 4.2 VDC | 0.14 VDC |
| 1789363604 | 765 Count | 289 Count | 10 Count | 4.19 VDC | 0.14 VDC |
| 1789362995 | 763 Count | 289 Count | 10 Count | 4.17 VDC | 0.14 VDC |
| 1789362387 | 761 Count | 289 Count | 10 Count | 4.21 VDC | 0.14 VDC |
| 1789361780 | 759 Count | 288 Count | 10 Count | 4.14 VDC | 0.14 VDC |
| 1789361172 | 757 Count | 287 Count | 10 Count | 4.16 VDC | 0.14 VDC |
| 1789360564 | 755 Count | 287 Count | 10 Count | 4.19 VDC | 0.14 VDC |
| 1789359956 | 753 Count | 287 Count | 10 Count | 4.2 VDC | 0.14 VDC |
| 1789359349 | 751 Count | 286 Count | 10 Count | 4.17 VDC | 0.14 VDC |
| 1789358741 | 749 Count | 286 Count | 10 Count | 4.22 VDC | 0.14 VDC |
| 1789358133 | 747 Count | 286 Count | 10 Count | 4.24 VDC | 0.14 VDC |
| 1789357526 | 745 Count | 284 Count | 10 Count | 4.23 VDC | 0.14 VDC |
| 1789356918 | 743 Count | 283 Count | 10 Count | 4.19 VDC | 0.14 VDC |
| 1789356310 | 741 Count | 283 Count | 10 Count | 4.2 VDC | 0.14 VDC |
| 1789355702 | 739 Count | 281 Count | 10 Count | 4.21 VDC | 0.14 VDC |
| 1789355095 | 737 Count | 279 Count | 10 Count | 4.24 VDC | 0.14 VDC |
| 1789354487 | 735 Count | 279 Count | 10 Count | 4.23 VDC | 0.14 VDC |
| 1789353880 | 733 Count | 279 Count | 10 Count | 4.17 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)