This is the latest recevied telemetry packets stored in our database for station/object SR8NDR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794945811 | 76 Count | 199 Count | 70 Count | 0 VDC | 8.24 VDC |
| 1794943410 | 25 Count | 70 Count | 22 Count | 0 VDC | 8.24 VDC |
| 1794941021 | 427 Count | 947 Count | 414 Count | 0 VDC | 8.26 VDC |
| 1794938619 | 331 Count | 778 Count | 320 Count | 0 VDC | 8.26 VDC |
| 1794936218 | 258 Count | 633 Count | 249 Count | 0 VDC | 8.28 VDC |
| 1794933816 | 203 Count | 517 Count | 196 Count | 0 VDC | 8.3 VDC |
| 1794931415 | 155 Count | 410 Count | 150 Count | 0 VDC | 8.32 VDC |
| 1794929013 | 115 Count | 300 Count | 112 Count | 0 VDC | 8.36 VDC |
| 1794926612 | 75 Count | 177 Count | 74 Count | 0 VDC | 8.88 VDC |
| 1794924210 | 455 Count | 1036 Count | 437 Count | 0 VDC | 9.52 VDC |
| 1794921809 | 390 Count | 898 Count | 375 Count | 0 VDC | 10.06 VDC |
| 1794919422 | 286 Count | 699 Count | 276 Count | 0 VDC | 10.2 VDC |
| 1794917020 | 235 Count | 561 Count | 227 Count | 0 VDC | 10.26 VDC |
| 1794914618 | 191 Count | 437 Count | 185 Count | 0 VDC | 10.3 VDC |
| 1794912217 | 138 Count | 310 Count | 134 Count | 0 VDC | 10.26 VDC |
| 1794909815 | 75 Count | 176 Count | 73 Count | 0 VDC | 10.38 VDC |
| 1794907416 | 19 Count | 50 Count | 19 Count | 0 VDC | 10.28 VDC |
| 1794905012 | 445 Count | 982 Count | 426 Count | 0 VDC | 10.24 VDC |
| 1794902611 | 372 Count | 832 Count | 355 Count | 0 VDC | 10.1 VDC |
| 1794900209 | 304 Count | 686 Count | 289 Count | 0 VDC | 10.08 VDC |
| 1794897822 | 252 Count | 575 Count | 243 Count | 0 VDC | 10.12 VDC |
| 1794895421 | 209 Count | 469 Count | 202 Count | 0 VDC | 10.08 VDC |
| 1794893019 | 170 Count | 376 Count | 165 Count | 0 VDC | 10.12 VDC |
| 1794890617 | 115 Count | 270 Count | 112 Count | 0 VDC | 10.12 VDC |
| 1794888214 | 78 Count | 188 Count | 77 Count | 0 VDC | 10.12 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)