This is the latest recevied telemetry packets stored in our database for station/object SR8NDR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792880724 | 293 Count | 976 Count | 283 Count | 0 VDC | 0 VDC |
| 1792878322 | 239 Count | 794 Count | 231 Count | 0 VDC | 0 VDC |
| 1792875921 | 179 Count | 605 Count | 173 Count | 0 VDC | 0 VDC |
| 1792873519 | 121 Count | 412 Count | 117 Count | 0 VDC | 0 VDC |
| 1792871118 | 68 Count | 245 Count | 66 Count | 0 VDC | 0 VDC |
| 1792868714 | 23 Count | 83 Count | 23 Count | 0 VDC | 0 VDC |
| 1792866312 | 286 Count | 980 Count | 273 Count | 0 VDC | 0 VDC |
| 1792863924 | 233 Count | 770 Count | 225 Count | 0 VDC | 0 VDC |
| 1792859121 | 131 Count | 443 Count | 127 Count | 0 VDC | 0 VDC |
| 1792856719 | 70 Count | 260 Count | 68 Count | 0 VDC | 0 VDC |
| 1792854318 | 22 Count | 78 Count | 22 Count | 0 VDC | 0 VDC |
| 1792851916 | 391 Count | 976 Count | 351 Count | 0 VDC | 0 VDC |
| 1792849514 | 340 Count | 827 Count | 302 Count | 0 VDC | 0 VDC |
| 1792847113 | 291 Count | 654 Count | 255 Count | 0 VDC | 0 VDC |
| 1792844711 | 239 Count | 503 Count | 206 Count | 0 VDC | 0 VDC |
| 1792842637 | 206 Count | 434 Count | 179 Count | 0 VDC | 0 VDC |
| 1792416642 | 191 Count | 406 Count | 169 Count | 0 VDC | 0 VDC |
| 1792414242 | 149 Count | 319 Count | 129 Count | 0 VDC | 0 VDC |
| 1792411838 | 112 Count | 234 Count | 95 Count | 0 VDC | 0 VDC |
| 1792411778 | 108 Count | 232 Count | 95 Count | 0 VDC | 0 VDC |
| 1792411733 | 104 Count | 230 Count | 95 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)