This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery Voltage* | Battery Current* | Load Current* | Solar Voltage* | Solar Current* |
|---|---|---|---|---|---|
| 1787549148 | 12.37 V | 306 mA | -281 mA | 0 V | 0 mA |
| 1787548548 | 12.37 V | 302 mA | -277 mA | 0 V | 0 mA |
| 1787547948 | 12.38 V | 301 mA | -276 mA | 0 V | 0 mA |
| 1787547346 | 12.38 V | 309 mA | -284 mA | 0 V | 0 mA |
| 1787546748 | 12.39 V | 285 mA | -261 mA | 0 V | 0 mA |
| 1787546148 | 12.4 V | 289 mA | -263 mA | 0 V | 0 mA |
| 1787545548 | 12.4 V | 308 mA | -282 mA | 0 V | 0 mA |
| 1787544948 | 12.4 V | 309 mA | -283 mA | 0 V | 0 mA |
| 1787544348 | 12.41 V | 303 mA | -277 mA | 0 V | 0 mA |
| 1787543746 | 12.41 V | 307 mA | -279 mA | 0 V | 0 mA |
| 1787543148 | 12.42 V | 293 mA | -267 mA | 0 V | 0 mA |
| 1787542548 | 12.42 V | 296 mA | -271 mA | 0 V | 0 mA |
| 1787541948 | 12.42 V | 301 mA | -276 mA | 0 V | 0 mA |
| 1787541348 | 12.43 V | 289 mA | -264 mA | 0 V | 0 mA |
| 1787540748 | 12.43 V | 295 mA | -270 mA | 0 V | 0 mA |
| 1787540146 | 12.43 V | 305 mA | -281 mA | 0 V | 0 mA |
| 1787539558 | 12.44 V | 290 mA | -264 mA | 0 V | 0 mA |
| 1787538348 | 12.45 V | 296 mA | -270 mA | 0 V | 0 mA |
| 1787537749 | 12.45 V | 285 mA | -259 mA | 0 V | 0 mA |
| 1787537149 | 12.45 V | 284 mA | -259 mA | 0 V | 0 mA |
| 1787536546 | 12.46 V | 298 mA | -273 mA | 0 V | 0 mA |
| 1787535949 | 12.46 V | 291 mA | -265 mA | 0.01 V | 0 mA |
| 1787535349 | 12.46 V | 292 mA | -266 mA | 0.01 V | 0 mA |
| 1787534749 | 12.46 V | 305 mA | -280 mA | 0.04 V | 0 mA |
| 1787534149 | 12.47 V | 297 mA | -271 mA | 0.1 V | 0 mA |
*Used Equation Coefficients:
Battery Voltage: 0, 0.01, 0
Battery Current: 0, 1, -4096
Load Current: 0, 1, -4096
Solar Voltage: 0, 0.01, 0
Solar Current: 0, 1, -4096
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)