This is the latest recevied telemetry packets stored in our database for station/object SQ3BKL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773115884 | 346 Count | 803 Count | 162 Count | 0 VDC | 0 VDC |
| 1773114083 | 340 Count | 795 Count | 160 Count | 0 VDC | 0 VDC |
| 1773112305 | 334 Count | 787 Count | 158 Count | 0 VDC | 0 VDC |
| 1773110503 | 328 Count | 780 Count | 156 Count | 0 VDC | 0 VDC |
| 1773108703 | 321 Count | 772 Count | 153 Count | 0 VDC | 0 VDC |
| 1773106902 | 315 Count | 764 Count | 151 Count | 0 VDC | 0 VDC |
| 1773105100 | 309 Count | 755 Count | 149 Count | 0 VDC | 0 VDC |
| 1773103299 | 303 Count | 745 Count | 147 Count | 0 VDC | 0 VDC |
| 1773101498 | 297 Count | 736 Count | 145 Count | 0 VDC | 0 VDC |
| 1773099697 | 291 Count | 727 Count | 143 Count | 0 VDC | 0 VDC |
| 1773097897 | 285 Count | 719 Count | 141 Count | 0 VDC | 0 VDC |
| 1773096096 | 279 Count | 711 Count | 139 Count | 0 VDC | 0 VDC |
| 1773094295 | 273 Count | 703 Count | 137 Count | 0 VDC | 0 VDC |
| 1773092494 | 267 Count | 695 Count | 135 Count | 0 VDC | 0 VDC |
| 1773090693 | 261 Count | 686 Count | 133 Count | 0 VDC | 0 VDC |
| 1773088894 | 255 Count | 679 Count | 131 Count | 0 VDC | 0 VDC |
| 1773087091 | 248 Count | 670 Count | 128 Count | 0 VDC | 0 VDC |
| 1773085290 | 242 Count | 662 Count | 126 Count | 0 VDC | 0 VDC |
| 1773083489 | 236 Count | 654 Count | 124 Count | 0 VDC | 0 VDC |
| 1773081688 | 230 Count | 646 Count | 122 Count | 0 VDC | 0 VDC |
| 1773079888 | 224 Count | 639 Count | 120 Count | 0 VDC | 0 VDC |
| 1773078087 | 218 Count | 632 Count | 118 Count | 0 VDC | 0 VDC |
| 1773076285 | 193 Count | 596 Count | 97 Count | 0 VDC | 0 VDC |
| 1773074484 | 180 Count | 574 Count | 88 Count | 0 VDC | 0 VDC |
| 1773072683 | 163 Count | 548 Count | 75 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)