This is the latest recevied telemetry packets stored in our database for station/object SP2GSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775262435 | 6 Count | 55 Count | 0 Count | 0 VDC | 0 VDC |
| 1775260641 | 1 Count | 35 Count | 0 Count | 0 VDC | 0 VDC |
| 1775258840 | 0 Count | 18 Count | 0 Count | 0 VDC | 0 VDC |
| 1775257039 | 103 Count | 1007 Count | 0 Count | 0 VDC | 0 VDC |
| 1775255239 | 102 Count | 989 Count | 0 Count | 0 VDC | 0 VDC |
| 1775253440 | 101 Count | 973 Count | 0 Count | 0 VDC | 0 VDC |
| 1775251638 | 100 Count | 957 Count | 0 Count | 0 VDC | 0 VDC |
| 1775249837 | 99 Count | 943 Count | 0 Count | 0 VDC | 0 VDC |
| 1775248037 | 98 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1775246236 | 97 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1775244436 | 96 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1775242635 | 95 Count | 876 Count | 0 Count | 0 VDC | 0 VDC |
| 1775240834 | 94 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1775239041 | 89 Count | 843 Count | 0 Count | 0 VDC | 0 VDC |
| 1775237239 | 88 Count | 831 Count | 0 Count | 0 VDC | 0 VDC |
| 1775235440 | 87 Count | 819 Count | 0 Count | 0 VDC | 0 VDC |
| 1775233638 | 86 Count | 809 Count | 0 Count | 0 VDC | 0 VDC |
| 1775231839 | 85 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1775230038 | 84 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1775228238 | 83 Count | 777 Count | 0 Count | 0 VDC | 0 VDC |
| 1775226436 | 82 Count | 766 Count | 0 Count | 0 VDC | 0 VDC |
| 1775224636 | 81 Count | 756 Count | 0 Count | 0 VDC | 0 VDC |
| 1775222836 | 80 Count | 745 Count | 0 Count | 0 VDC | 0 VDC |
| 1775221035 | 79 Count | 735 Count | 0 Count | 0 VDC | 0 VDC |
| 1775219235 | 78 Count | 726 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)