This is the latest recevied telemetry packets stored in our database for station/object SP6PTT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789370899 | 134 Count | 937 Count | 122 Count | 0 VDC | 0 VDC |
| 1789369098 | 110 Count | 789 Count | 102 Count | 0 VDC | 0 VDC |
| 1789367297 | 85 Count | 622 Count | 78 Count | 0 VDC | 0 VDC |
| 1789365496 | 61 Count | 412 Count | 55 Count | 0 VDC | 0 VDC |
| 1789363696 | 39 Count | 251 Count | 38 Count | 0 VDC | 0 VDC |
| 1789361895 | 23 Count | 136 Count | 23 Count | 0 VDC | 0 VDC |
| 1789360094 | 174 Count | 1088 Count | 164 Count | 0 VDC | 0 VDC |
| 1789358293 | 160 Count | 967 Count | 151 Count | 0 VDC | 0 VDC |
| 1789356499 | 145 Count | 861 Count | 137 Count | 0 VDC | 0 VDC |
| 1789354699 | 126 Count | 747 Count | 119 Count | 0 VDC | 0 VDC |
| 1789352898 | 108 Count | 646 Count | 102 Count | 0 VDC | 0 VDC |
| 1789351097 | 92 Count | 545 Count | 87 Count | 0 VDC | 0 VDC |
| 1789349296 | 74 Count | 440 Count | 70 Count | 0 VDC | 0 VDC |
| 1789347496 | 56 Count | 325 Count | 53 Count | 0 VDC | 0 VDC |
| 1789345695 | 39 Count | 224 Count | 37 Count | 0 VDC | 0 VDC |
| 1789343894 | 19 Count | 110 Count | 18 Count | 0 VDC | 0 VDC |
| 1789342093 | 227 Count | 1009 Count | 163 Count | 0 VDC | 0 VDC |
| 1789340293 | 206 Count | 893 Count | 143 Count | 0 VDC | 0 VDC |
| 1789338492 | 186 Count | 762 Count | 124 Count | 0 VDC | 0 VDC |
| 1789336691 | 168 Count | 651 Count | 107 Count | 0 VDC | 0 VDC |
| 1789334899 | 153 Count | 541 Count | 93 Count | 0 VDC | 0 VDC |
| 1789333098 | 135 Count | 427 Count | 76 Count | 0 VDC | 0 VDC |
| 1789331297 | 49 Count | 262 Count | 34 Count | 0 VDC | 0 VDC |
| 1789329497 | 15 Count | 110 Count | 14 Count | 0 VDC | 0 VDC |
| 1789327696 | 11 Count | 87 Count | 11 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)