This is the latest recevied telemetry packets stored in our database for station/object LU2EQD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771051649 | 307 Count | 591 Count | 247 Count | 0 VDC | 0 VDC |
| 1771049848 | 306 Count | 583 Count | 247 Count | 0 VDC | 0 VDC |
| 1771048048 | 305 Count | 575 Count | 247 Count | 0 VDC | 0 VDC |
| 1771046247 | 304 Count | 568 Count | 247 Count | 0 VDC | 0 VDC |
| 1771044446 | 303 Count | 561 Count | 247 Count | 0 VDC | 0 VDC |
| 1771030049 | 295 Count | 504 Count | 247 Count | 0 VDC | 0 VDC |
| 1771028248 | 294 Count | 497 Count | 247 Count | 0 VDC | 0 VDC |
| 1771026447 | 293 Count | 489 Count | 247 Count | 0 VDC | 0 VDC |
| 1771024649 | 292 Count | 481 Count | 247 Count | 0 VDC | 0 VDC |
| 1771022846 | 291 Count | 474 Count | 247 Count | 0 VDC | 0 VDC |
| 1771021045 | 290 Count | 467 Count | 247 Count | 0 VDC | 0 VDC |
| 1771019245 | 289 Count | 459 Count | 247 Count | 0 VDC | 0 VDC |
| 1771017444 | 288 Count | 451 Count | 247 Count | 0 VDC | 0 VDC |
| 1771015643 | 287 Count | 443 Count | 247 Count | 0 VDC | 0 VDC |
| 1771013842 | 286 Count | 436 Count | 247 Count | 0 VDC | 0 VDC |
| 1771012042 | 285 Count | 429 Count | 247 Count | 0 VDC | 0 VDC |
| 1771010241 | 283 Count | 419 Count | 246 Count | 0 VDC | 0 VDC |
| 1771009172 | 282 Count | 419 Count | 246 Count | 0 VDC | 0 VDC |
| 1771008113 | 276 Count | 408 Count | 241 Count | 0 VDC | 0 VDC |
| 1771005578 | 184 Count | 313 Count | 150 Count | 0 VDC | 0 VDC |
| 1771003767 | 164 Count | 288 Count | 131 Count | 0 VDC | 0 VDC |
| 1771000540 | 158 Count | 278 Count | 127 Count | 0 VDC | 0 VDC |
| 1770998740 | 153 Count | 268 Count | 123 Count | 0 VDC | 0 VDC |
| 1770996939 | 151 Count | 261 Count | 122 Count | 0 VDC | 0 VDC |
| 1770995138 | 140 Count | 245 Count | 112 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)