This is the latest recevied telemetry packets stored in our database for station/object SP8PB-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775064237 | 173 Count | 323 Count | 108 Count | 0 VDC | 0 VDC |
| 1775063336 | 169 Count | 315 Count | 105 Count | 0 VDC | 0 VDC |
| 1775062435 | 165 Count | 307 Count | 102 Count | 0 VDC | 0 VDC |
| 1775061535 | 161 Count | 299 Count | 99 Count | 0 VDC | 0 VDC |
| 1775060634 | 159 Count | 296 Count | 98 Count | 0 VDC | 0 VDC |
| 1775059733 | 157 Count | 292 Count | 97 Count | 0 VDC | 0 VDC |
| 1775058832 | 154 Count | 286 Count | 95 Count | 0 VDC | 0 VDC |
| 1775057932 | 151 Count | 282 Count | 93 Count | 0 VDC | 0 VDC |
| 1775057031 | 149 Count | 278 Count | 92 Count | 0 VDC | 0 VDC |
| 1775056130 | 146 Count | 271 Count | 90 Count | 0 VDC | 0 VDC |
| 1775055230 | 142 Count | 267 Count | 87 Count | 0 VDC | 0 VDC |
| 1775054329 | 138 Count | 260 Count | 84 Count | 0 VDC | 0 VDC |
| 1775053428 | 135 Count | 254 Count | 82 Count | 0 VDC | 0 VDC |
| 1775052527 | 132 Count | 250 Count | 80 Count | 0 VDC | 0 VDC |
| 1775051627 | 130 Count | 247 Count | 79 Count | 0 VDC | 0 VDC |
| 1775050726 | 127 Count | 241 Count | 77 Count | 0 VDC | 0 VDC |
| 1775049825 | 124 Count | 235 Count | 75 Count | 0 VDC | 0 VDC |
| 1775048924 | 121 Count | 228 Count | 73 Count | 0 VDC | 0 VDC |
| 1775048024 | 118 Count | 222 Count | 71 Count | 0 VDC | 0 VDC |
| 1775047123 | 114 Count | 214 Count | 68 Count | 0 VDC | 0 VDC |
| 1775046222 | 111 Count | 207 Count | 66 Count | 0 VDC | 0 VDC |
| 1775045321 | 108 Count | 200 Count | 64 Count | 0 VDC | 0 VDC |
| 1775044421 | 106 Count | 197 Count | 63 Count | 0 VDC | 0 VDC |
| 1775043520 | 103 Count | 190 Count | 61 Count | 0 VDC | 0 VDC |
| 1775042619 | 101 Count | 186 Count | 60 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)