This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765468819 | 303 Count | 276 Count | 112 Count | 4.17 VDC | 0.14 VDC |
| 1765467013 | 300 Count | 273 Count | 111 Count | 4.15 VDC | 0.14 VDC |
| 1765465207 | 297 Count | 270 Count | 110 Count | 4.17 VDC | 0.14 VDC |
| 1765463401 | 294 Count | 267 Count | 109 Count | 4.23 VDC | 0.14 VDC |
| 1765461596 | 291 Count | 264 Count | 108 Count | 4.19 VDC | 0.14 VDC |
| 1765459790 | 288 Count | 261 Count | 107 Count | 4.24 VDC | 0.14 VDC |
| 1765457984 | 285 Count | 258 Count | 106 Count | 4.23 VDC | 0.14 VDC |
| 1765456179 | 282 Count | 255 Count | 105 Count | 4.16 VDC | 0.14 VDC |
| 1765454374 | 279 Count | 252 Count | 104 Count | 4.2 VDC | 0.14 VDC |
| 1765452595 | 276 Count | 249 Count | 103 Count | 4.14 VDC | 0.14 VDC |
| 1765450761 | 273 Count | 246 Count | 102 Count | 4.16 VDC | 0.14 VDC |
| 1765448956 | 270 Count | 243 Count | 101 Count | 4.16 VDC | 0.14 VDC |
| 1765447218 | 263 Count | 238 Count | 100 Count | 4.15 VDC | 0.14 VDC |
| 1765445414 | 260 Count | 235 Count | 99 Count | 4.2 VDC | 0.14 VDC |
| 1765443607 | 257 Count | 232 Count | 98 Count | 4.2 VDC | 0.14 VDC |
| 1765441801 | 254 Count | 229 Count | 97 Count | 4.17 VDC | 0.14 VDC |
| 1765439995 | 251 Count | 226 Count | 96 Count | 4.16 VDC | 0.14 VDC |
| 1765438190 | 248 Count | 223 Count | 95 Count | 4.17 VDC | 0.14 VDC |
| 1765436384 | 245 Count | 220 Count | 94 Count | 4.2 VDC | 0.14 VDC |
| 1765434578 | 242 Count | 217 Count | 93 Count | 4.21 VDC | 0.14 VDC |
| 1765432773 | 239 Count | 214 Count | 92 Count | 4.24 VDC | 0.14 VDC |
| 1765430966 | 236 Count | 211 Count | 91 Count | 4.18 VDC | 0.14 VDC |
| 1765429161 | 233 Count | 208 Count | 90 Count | 4.19 VDC | 0.14 VDC |
| 1765427355 | 230 Count | 205 Count | 89 Count | 4.24 VDC | 0.14 VDC |
| 1765425619 | 224 Count | 201 Count | 89 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)