This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775185229 | 91 Count | 126 Count | 75 Count | 4.19 VDC | 0 VDC |
| 1775184329 | 86 Count | 121 Count | 71 Count | 4.22 VDC | 0 VDC |
| 1775183428 | 81 Count | 114 Count | 67 Count | 4.26 VDC | 0 VDC |
| 1775182527 | 76 Count | 104 Count | 63 Count | 4.17 VDC | 0 VDC |
| 1775181627 | 69 Count | 93 Count | 57 Count | 4.25 VDC | 0 VDC |
| 1775180726 | 63 Count | 82 Count | 52 Count | 4.19 VDC | 0 VDC |
| 1775179825 | 57 Count | 71 Count | 47 Count | 4.19 VDC | 0 VDC |
| 1775178924 | 51 Count | 60 Count | 42 Count | 4.23 VDC | 0 VDC |
| 1775178024 | 45 Count | 50 Count | 37 Count | 4.23 VDC | 0 VDC |
| 1775177123 | 39 Count | 39 Count | 32 Count | 4.25 VDC | 0 VDC |
| 1775176267 | 37 Count | 39 Count | 32 Count | 4.25 VDC | 0 VDC |
| 1775175366 | 32 Count | 34 Count | 28 Count | 4.19 VDC | 0 VDC |
| 1775174466 | 25 Count | 27 Count | 22 Count | 4.15 VDC | 0 VDC |
| 1775173565 | 18 Count | 20 Count | 16 Count | 4.24 VDC | 0 VDC |
| 1775172664 | 13 Count | 15 Count | 12 Count | 4.2 VDC | 0 VDC |
| 1775171764 | 6 Count | 7 Count | 6 Count | 4.21 VDC | 0 VDC |
| 1775170863 | 864 Count | 1005 Count | 728 Count | 4.16 VDC | 0 VDC |
| 1775169963 | 857 Count | 997 Count | 722 Count | 4.16 VDC | 0 VDC |
| 1775169062 | 851 Count | 990 Count | 717 Count | 4.24 VDC | 0 VDC |
| 1775168161 | 845 Count | 984 Count | 712 Count | 4.24 VDC | 0 VDC |
| 1775167261 | 838 Count | 977 Count | 706 Count | 4.2 VDC | 0 VDC |
| 1775166360 | 831 Count | 969 Count | 700 Count | 4.19 VDC | 0 VDC |
| 1775165459 | 825 Count | 959 Count | 695 Count | 4.19 VDC | 0 VDC |
| 1775164559 | 819 Count | 949 Count | 690 Count | 4.26 VDC | 0 VDC |
| 1775163658 | 812 Count | 939 Count | 684 Count | 4.24 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)