This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794966122 | 503 Count | 621 Count | 421 Count | 4.13 VDC | 0 VDC |
| 1794965219 | 499 Count | 617 Count | 418 Count | 4.13 VDC | 0 VDC |
| 1794964316 | 494 Count | 612 Count | 414 Count | 4.13 VDC | 0 VDC |
| 1794963413 | 490 Count | 607 Count | 411 Count | 4.13 VDC | 0 VDC |
| 1794962510 | 486 Count | 601 Count | 408 Count | 4.13 VDC | 0 VDC |
| 1794961607 | 482 Count | 596 Count | 405 Count | 4.13 VDC | 0 VDC |
| 1794960704 | 477 Count | 589 Count | 401 Count | 4.13 VDC | 0 VDC |
| 1794959801 | 473 Count | 584 Count | 398 Count | 4.13 VDC | 0 VDC |
| 1794958898 | 468 Count | 577 Count | 394 Count | 4.13 VDC | 0 VDC |
| 1794958067 | 464 Count | 573 Count | 391 Count | 4.13 VDC | 0 VDC |
| 1794957164 | 460 Count | 565 Count | 388 Count | 4.14 VDC | 0 VDC |
| 1794956261 | 456 Count | 560 Count | 385 Count | 4.13 VDC | 0 VDC |
| 1794955358 | 451 Count | 553 Count | 381 Count | 4.13 VDC | 0 VDC |
| 1794954455 | 447 Count | 549 Count | 378 Count | 4.13 VDC | 0 VDC |
| 1794953552 | 442 Count | 543 Count | 374 Count | 4.13 VDC | 0 VDC |
| 1794952649 | 435 Count | 529 Count | 368 Count | 4.13 VDC | 0 VDC |
| 1794951746 | 413 Count | 507 Count | 347 Count | 4.14 VDC | 0 VDC |
| 1794950842 | 409 Count | 499 Count | 344 Count | 4.13 VDC | 0 VDC |
| 1794949939 | 404 Count | 493 Count | 340 Count | 4.13 VDC | 0 VDC |
| 1794949036 | 400 Count | 489 Count | 337 Count | 4.13 VDC | 0 VDC |
| 1794948133 | 395 Count | 484 Count | 333 Count | 4.13 VDC | 0 VDC |
| 1794947230 | 391 Count | 480 Count | 330 Count | 4.13 VDC | 0 VDC |
| 1794946327 | 386 Count | 474 Count | 326 Count | 4.13 VDC | 0 VDC |
| 1794945424 | 382 Count | 470 Count | 323 Count | 4.13 VDC | 0 VDC |
| 1794944521 | 377 Count | 464 Count | 319 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)