This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775346342 | 492 Count | 726 Count | 413 Count | 4.24 VDC | 0 VDC |
| 1775345442 | 486 Count | 717 Count | 408 Count | 4.21 VDC | 0 VDC |
| 1775344541 | 480 Count | 708 Count | 403 Count | 4.18 VDC | 0 VDC |
| 1775343640 | 474 Count | 697 Count | 398 Count | 4.2 VDC | 0 VDC |
| 1775342740 | 468 Count | 688 Count | 393 Count | 4.23 VDC | 0 VDC |
| 1775341839 | 462 Count | 679 Count | 388 Count | 4.25 VDC | 0 VDC |
| 1775340938 | 456 Count | 669 Count | 383 Count | 4.25 VDC | 0 VDC |
| 1775340037 | 437 Count | 644 Count | 365 Count | 4.19 VDC | 0 VDC |
| 1775339136 | 431 Count | 637 Count | 360 Count | 4.25 VDC | 0 VDC |
| 1775338236 | 425 Count | 628 Count | 355 Count | 4.25 VDC | 0 VDC |
| 1775337335 | 419 Count | 619 Count | 350 Count | 4.2 VDC | 0 VDC |
| 1775336434 | 413 Count | 610 Count | 345 Count | 4.17 VDC | 0 VDC |
| 1775335534 | 407 Count | 601 Count | 340 Count | 4.16 VDC | 0 VDC |
| 1775334633 | 401 Count | 592 Count | 335 Count | 4.15 VDC | 0 VDC |
| 1775333733 | 395 Count | 583 Count | 330 Count | 4.16 VDC | 0 VDC |
| 1775332832 | 389 Count | 574 Count | 325 Count | 4.22 VDC | 0 VDC |
| 1775331931 | 383 Count | 565 Count | 320 Count | 4.15 VDC | 0 VDC |
| 1775331031 | 376 Count | 554 Count | 314 Count | 4.15 VDC | 0 VDC |
| 1775330130 | 370 Count | 545 Count | 309 Count | 4.15 VDC | 0 VDC |
| 1775329229 | 364 Count | 536 Count | 304 Count | 4.22 VDC | 0 VDC |
| 1775327443 | 352 Count | 519 Count | 294 Count | 4.15 VDC | 0 VDC |
| 1775326543 | 346 Count | 510 Count | 289 Count | 4.22 VDC | 0 VDC |
| 1775325642 | 340 Count | 501 Count | 284 Count | 4.19 VDC | 0 VDC |
| 1775324741 | 335 Count | 494 Count | 280 Count | 4.17 VDC | 0 VDC |
| 1775323841 | 329 Count | 486 Count | 275 Count | 4.25 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)