This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793353234 | 989 Count | 761 Count | 694 Count | 4.12 VDC | 0 VDC |
| 1793352333 | 986 Count | 759 Count | 692 Count | 4.12 VDC | 0 VDC |
| 1793351432 | 983 Count | 757 Count | 690 Count | 4.12 VDC | 0 VDC |
| 1793350532 | 980 Count | 755 Count | 688 Count | 4.12 VDC | 0 VDC |
| 1793349631 | 977 Count | 753 Count | 686 Count | 4.12 VDC | 0 VDC |
| 1793348731 | 974 Count | 751 Count | 684 Count | 4.12 VDC | 0 VDC |
| 1793347830 | 971 Count | 749 Count | 682 Count | 4.16 VDC | 0 VDC |
| 1793346929 | 968 Count | 747 Count | 680 Count | 4.12 VDC | 0 VDC |
| 1793346029 | 965 Count | 745 Count | 678 Count | 4.12 VDC | 0 VDC |
| 1793345128 | 962 Count | 743 Count | 676 Count | 4.12 VDC | 0 VDC |
| 1793322641 | 887 Count | 693 Count | 626 Count | 4.12 VDC | 0 VDC |
| 1793321740 | 884 Count | 691 Count | 624 Count | 4.11 VDC | 0 VDC |
| 1793320840 | 881 Count | 689 Count | 622 Count | 4.12 VDC | 0 VDC |
| 1793319939 | 878 Count | 687 Count | 620 Count | 4.12 VDC | 0 VDC |
| 1793319038 | 875 Count | 685 Count | 618 Count | 4.12 VDC | 0 VDC |
| 1793318138 | 872 Count | 683 Count | 616 Count | 4.12 VDC | 0 VDC |
| 1793317237 | 869 Count | 681 Count | 614 Count | 4.12 VDC | 0 VDC |
| 1793316336 | 866 Count | 679 Count | 612 Count | 4.12 VDC | 0 VDC |
| 1793315436 | 863 Count | 677 Count | 610 Count | 4.12 VDC | 0 VDC |
| 1793314535 | 860 Count | 675 Count | 608 Count | 4.12 VDC | 0 VDC |
| 1793313634 | 857 Count | 673 Count | 606 Count | 4.12 VDC | 0 VDC |
| 1793312734 | 854 Count | 671 Count | 604 Count | 4.12 VDC | 0 VDC |
| 1793311833 | 851 Count | 669 Count | 602 Count | 4.12 VDC | 0 VDC |
| 1793310932 | 848 Count | 667 Count | 600 Count | 4.12 VDC | 0 VDC |
| 1793310032 | 845 Count | 665 Count | 598 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)