This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765517421 | 31 Count | 21 Count | 15 Count | 4.34 VDC | 0 VDC |
| 1765515621 | 30 Count | 21 Count | 15 Count | 4.29 VDC | 0 VDC |
| 1765513820 | 29 Count | 21 Count | 15 Count | 4.31 VDC | 0 VDC |
| 1765512019 | 28 Count | 21 Count | 15 Count | 4.34 VDC | 0 VDC |
| 1765510219 | 27 Count | 21 Count | 15 Count | 4.3 VDC | 0 VDC |
| 1765508418 | 26 Count | 21 Count | 15 Count | 4.33 VDC | 0 VDC |
| 1765506617 | 25 Count | 21 Count | 15 Count | 4.34 VDC | 0 VDC |
| 1765504816 | 24 Count | 21 Count | 15 Count | 4.33 VDC | 0 VDC |
| 1765503023 | 23 Count | 21 Count | 15 Count | 4.29 VDC | 0 VDC |
| 1765501223 | 22 Count | 21 Count | 15 Count | 4.34 VDC | 0 VDC |
| 1765499422 | 21 Count | 21 Count | 15 Count | 4.3 VDC | 0 VDC |
| 1765497621 | 20 Count | 20 Count | 15 Count | 4.33 VDC | 0 VDC |
| 1765495820 | 17 Count | 17 Count | 13 Count | 4.34 VDC | 0 VDC |
| 1765494020 | 14 Count | 14 Count | 11 Count | 4.28 VDC | 0 VDC |
| 1765492219 | 11 Count | 11 Count | 9 Count | 4.29 VDC | 0 VDC |
| 1765490418 | 4 Count | 5 Count | 3 Count | 4.31 VDC | 0 VDC |
| 1765488617 | 2 Count | 3 Count | 2 Count | 4.27 VDC | 0 VDC |
| 1765486817 | 1002 Count | 683 Count | 553 Count | 4.31 VDC | 0 VDC |
| 1765485016 | 999 Count | 680 Count | 551 Count | 4.28 VDC | 0 VDC |
| 1765483215 | 996 Count | 678 Count | 549 Count | 4.34 VDC | 0 VDC |
| 1765481424 | 993 Count | 675 Count | 547 Count | 4.31 VDC | 0 VDC |
| 1765479623 | 990 Count | 672 Count | 545 Count | 4.29 VDC | 0 VDC |
| 1765477822 | 988 Count | 670 Count | 544 Count | 4.3 VDC | 0 VDC |
| 1765476022 | 985 Count | 667 Count | 542 Count | 4.28 VDC | 0 VDC |
| 1765474221 | 982 Count | 664 Count | 540 Count | 4.33 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)