This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770993662 | 728 Count | 358 Count | 358 Count | 4.38 VDC | 0 VDC |
| 1770991861 | 726 Count | 357 Count | 357 Count | 4.29 VDC | 0 VDC |
| 1770990060 | 724 Count | 356 Count | 356 Count | 4.29 VDC | 0 VDC |
| 1770988259 | 722 Count | 355 Count | 355 Count | 4.33 VDC | 0 VDC |
| 1770986459 | 720 Count | 354 Count | 354 Count | 4.26 VDC | 0 VDC |
| 1770984658 | 718 Count | 353 Count | 353 Count | 4.28 VDC | 0 VDC |
| 1770982857 | 716 Count | 352 Count | 352 Count | 4.33 VDC | 0 VDC |
| 1770981056 | 714 Count | 351 Count | 351 Count | 4.31 VDC | 0 VDC |
| 1770979255 | 712 Count | 350 Count | 350 Count | 4.29 VDC | 0 VDC |
| 1770977462 | 710 Count | 349 Count | 349 Count | 4.31 VDC | 0 VDC |
| 1770975662 | 708 Count | 348 Count | 348 Count | 4.27 VDC | 0 VDC |
| 1770973861 | 706 Count | 347 Count | 347 Count | 4.31 VDC | 0 VDC |
| 1770972060 | 704 Count | 346 Count | 346 Count | 4.29 VDC | 0 VDC |
| 1770970260 | 702 Count | 345 Count | 345 Count | 4.28 VDC | 0 VDC |
| 1770968459 | 700 Count | 344 Count | 344 Count | 4.32 VDC | 0 VDC |
| 1770966658 | 698 Count | 343 Count | 343 Count | 4.3 VDC | 0 VDC |
| 1770964858 | 696 Count | 342 Count | 342 Count | 4.33 VDC | 0 VDC |
| 1770963057 | 694 Count | 341 Count | 341 Count | 4.33 VDC | 0 VDC |
| 1770961256 | 692 Count | 340 Count | 340 Count | 4.34 VDC | 0 VDC |
| 1770959456 | 690 Count | 339 Count | 339 Count | 4.33 VDC | 0 VDC |
| 1770957655 | 688 Count | 338 Count | 338 Count | 4.27 VDC | 0 VDC |
| 1770955862 | 686 Count | 337 Count | 337 Count | 4.33 VDC | 0 VDC |
| 1770954061 | 684 Count | 336 Count | 336 Count | 4.28 VDC | 0 VDC |
| 1770952260 | 682 Count | 335 Count | 335 Count | 4.31 VDC | 0 VDC |
| 1770950460 | 680 Count | 334 Count | 334 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)