This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766965232 | 293 Count | 265 Count | 227 Count | 4.3 VDC | 0 VDC |
| 1766963432 | 289 Count | 262 Count | 224 Count | 4.3 VDC | 0 VDC |
| 1766961631 | 285 Count | 259 Count | 221 Count | 4.31 VDC | 0 VDC |
| 1766959830 | 279 Count | 254 Count | 216 Count | 4.38 VDC | 0 VDC |
| 1766958030 | 273 Count | 249 Count | 211 Count | 4.3 VDC | 0 VDC |
| 1766956229 | 268 Count | 245 Count | 207 Count | 4.33 VDC | 0 VDC |
| 1766954437 | 261 Count | 239 Count | 201 Count | 4.33 VDC | 0 VDC |
| 1766952637 | 255 Count | 233 Count | 196 Count | 4.29 VDC | 0 VDC |
| 1766950836 | 250 Count | 227 Count | 192 Count | 4.34 VDC | 0 VDC |
| 1766949035 | 245 Count | 222 Count | 188 Count | 4.34 VDC | 0 VDC |
| 1766947235 | 240 Count | 217 Count | 184 Count | 4.29 VDC | 0 VDC |
| 1766945434 | 235 Count | 212 Count | 180 Count | 4.3 VDC | 0 VDC |
| 1766943633 | 221 Count | 198 Count | 167 Count | 4.3 VDC | 0 VDC |
| 1766941833 | 212 Count | 189 Count | 159 Count | 4.34 VDC | 0 VDC |
| 1766940032 | 203 Count | 179 Count | 151 Count | 4.31 VDC | 0 VDC |
| 1766938231 | 198 Count | 174 Count | 147 Count | 4.34 VDC | 0 VDC |
| 1766936431 | 191 Count | 167 Count | 141 Count | 4.3 VDC | 0 VDC |
| 1766934630 | 184 Count | 160 Count | 135 Count | 4.29 VDC | 0 VDC |
| 1766932837 | 178 Count | 154 Count | 130 Count | 4.28 VDC | 0 VDC |
| 1766931037 | 173 Count | 149 Count | 126 Count | 4.27 VDC | 0 VDC |
| 1766929236 | 168 Count | 144 Count | 122 Count | 4.27 VDC | 0 VDC |
| 1766927435 | 163 Count | 139 Count | 118 Count | 4.27 VDC | 0 VDC |
| 1766925635 | 154 Count | 130 Count | 110 Count | 4.33 VDC | 0 VDC |
| 1766923834 | 146 Count | 122 Count | 103 Count | 4.31 VDC | 0 VDC |
| 1766922033 | 142 Count | 118 Count | 100 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)