This is the latest recevied telemetry packets stored in our database for station/object SP9RUT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793305880 | 702 Count | 1186 Count | 0 Count | 0 VDC | 0 VDC |
| 1793298680 | 586 Count | 981 Count | 0 Count | 0 VDC | 0 VDC |
| 1793284279 | 355 Count | 568 Count | 0 Count | 0 VDC | 0 VDC |
| 1793277079 | 239 Count | 411 Count | 0 Count | 0 VDC | 0 VDC |
| 1793269879 | 113 Count | 238 Count | 0 Count | 0 VDC | 0 VDC |
| 1793262680 | 680 Count | 1182 Count | 0 Count | 0 VDC | 0 VDC |
| 1793255480 | 566 Count | 946 Count | 0 Count | 0 VDC | 0 VDC |
| 1793248279 | 450 Count | 751 Count | 0 Count | 0 VDC | 0 VDC |
| 1793241079 | 336 Count | 574 Count | 0 Count | 0 VDC | 0 VDC |
| 1793233879 | 223 Count | 400 Count | 0 Count | 0 VDC | 0 VDC |
| 1793226679 | 108 Count | 204 Count | 0 Count | 0 VDC | 0 VDC |
| 1793219478 | 528 Count | 1190 Count | 0 Count | 0 VDC | 0 VDC |
| 1793212278 | 528 Count | 954 Count | 0 Count | 0 VDC | 0 VDC |
| 1793205078 | 450 Count | 752 Count | 0 Count | 0 VDC | 0 VDC |
| 1793197878 | 334 Count | 520 Count | 0 Count | 0 VDC | 0 VDC |
| 1793190678 | 224 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1793183478 | 111 Count | 205 Count | 0 Count | 0 VDC | 0 VDC |
| 1793176278 | 787 Count | 1019 Count | 0 Count | 0 VDC | 0 VDC |
| 1793169078 | 674 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1793161877 | 560 Count | 679 Count | 0 Count | 0 VDC | 0 VDC |
| 1793154677 | 447 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1793147477 | 333 Count | 410 Count | 0 Count | 0 VDC | 0 VDC |
| 1793140277 | 221 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1793133077 | 106 Count | 148 Count | 0 Count | 0 VDC | 0 VDC |
| 1793125877 | 687 Count | 1115 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)